2018 Subaru BRZ Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Subaru BRZ, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2018 BRZ — Year-Specific Fitment Context
The 2018 Subaru BRZ is in year 6 of 12 using the 5x100 pattern (2013–2024). Wheels from any 2013–2024 Subaru BRZ are cross-compatible with the 2018 model.
Subaru BRZ Bolt Pattern by Year
The table below shows how the BRZ's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2018 Subaru BRZ
For the 2018 Subaru BRZ, the 5x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load distribution. The stock offset is 48mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use 12x1.25 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat, while aftermarket wheels may require ball or conical seats. Improper lug nut seating can lead to wheel detachment. Verify thread engagement (at least 7 turns) and torque to 80-90 ft-lbs.
Historical Fitment Data Reference
In our dataset, Subaru BRZ appears from 2013 to 2024 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using spacers without extended studs; stock studs are short and may not provide adequate thread engagement.
- ✅ Check brake caliper clearance when changing offset or wheel diameter; some aftermarket wheels may require spacers to clear the caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Subaru BRZ — Frequently Asked Questions
What is the bolt pattern for a 2018 Subaru BRZ?
The 2018 Subaru BRZ uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru BRZ have the same bolt pattern as the 2018?
The Subaru BRZ uses the 5x100 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Do 2018 Subaru BRZs use lug bolts or lug nuts?
The 2018 BRZ requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2018 Subaru BRZ use?
The 2018 Subaru BRZ uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 56.1mm center bore important for the 2018 BRZ?
The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2018 Subaru BRZ?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 48mm, and a center bore of at least 56.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset