2019 Subaru BRZ Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Subaru BRZ, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 BRZ — Year-Specific Fitment Context
The 2019 Subaru BRZ is in year 7 of 12 using the 5x100 pattern (2013–2024). Wheels from any 2013–2024 Subaru BRZ are cross-compatible with the 2019 model.
Subaru BRZ Bolt Pattern by Year
The table below shows how the BRZ's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2019 Subaru BRZ
For your 2019 Subaru BRZ, the 5x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration. The stock offset is 48mm; deviating more than ±5mm may cause rubbing or clearance issues. Always use correct lug nuts: 12x1.25 thread pitch with a conical (60-degree) seat. Ball-seat or incorrect nuts can loosen. Re-torque after 50-100 miles. Wheels from 2013-2024 BRZ/FR-S/86 are direct fit.
Historical Fitment Data Reference
In our dataset, Subaru BRZ appears from 2013 to 2024 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid spacers without extended studs; stock studs are short.
- ✅ Check inner clearance for aftermarket brakes; some wheels may not clear Brembo calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Subaru BRZ — Frequently Asked Questions
What is the bolt pattern for a 2019 Subaru BRZ?
The 2019 Subaru BRZ uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru BRZ have the same bolt pattern as the 2019?
The Subaru BRZ uses the 5x100 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Can I use spacers on my 2019 Subaru BRZ?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
How tight should I torque the lug nuts on a 2019 Subaru BRZ?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 48mm offset mean for the 2019 BRZ?
An offset of 48mm means the wheel's mounting surface is 48mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Subaru.
What is the PCD for a 2019 Subaru BRZ?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 BRZ, the PCD is 5x100.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset