2024 Subaru BRZ Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Subaru BRZ, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 48 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2024 BRZ — Year-Specific Fitment Context
The 2024 model year is the final year of the Subaru BRZ's 5x100 bolt pattern run (since 2013). Wheels from any 2013–2024 Subaru BRZ are cross-compatible with the 2024 model.
Subaru BRZ Bolt Pattern by Year
The table below shows how the BRZ's wheel specifications have changed over the years. The 2024 model year is highlighted.
Fitment Notes
The 2024 Subaru BRZ has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Subaru BRZ appears from 2013 to 2024 (11 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
2024 Subaru BRZ — Frequently Asked Questions
What is the bolt pattern for a 2024 Subaru BRZ?
The 2024 Subaru BRZ uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 48mm.
What other years of Subaru BRZ have the same bolt pattern as the 2024?
The Subaru BRZ uses the 5x100 pattern from 2013 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2024 Subaru BRZ?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2024 Subaru?
The 2024 BRZ uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2024 Subaru BRZ?
The factory center bore (hub bore) for the 2024 Subaru BRZ is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2024 Subaru BRZ?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 56.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Subaru BRZ is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2013-2024 (11 model years).
- Observed bolt-pattern variants: 1 (5x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2024 Subaru BRZ, please report it via our About page contact so we can verify and update this record.