2010 Suzuki SX4 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2010 Suzuki SX4 is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 50, and utilizes B 12x1.50 (Cone seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2010 Suzuki SX4 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 50 |
| Thread Size (Lug Nut / Bolt) | B 12x1.50 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 SX4 — Year-Specific Fitment Context
The 2010 Suzuki SX4 is in year 4 of 7 using the 5x114.3 pattern (2007–2013). Wheels from any 2007–2013 Suzuki SX4 are cross-compatible with the 2010 model.
Suzuki SX4 Bolt Pattern by Year
The table below shows how the SX4's wheel specifications have changed over the years. The 2010 model year is highlighted.
2010 Suzuki SX4 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2010 Suzuki SX4, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1992 MAZDA MX-6 | 67.1 mm | 67.1mm → 60.1mm |
45 |
| 1992 MAZDA Navajo | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
| 1992 MAZDA Protege | 67.1 mm | 67.1mm → 60.1mm |
45-50 |
| 2002 MAZDA Protege5 | 67.1 mm | 67.1mm → 60.1mm |
52,5 |
| 1993 MAZDA RX-7 | 67.1 mm | 67.1mm → 60.1mm |
50 |
| 2004 MAZDA RX-8 | 67.1 mm | 67.1mm → 60.1mm |
50 |
Expert Buying Guide for 2010 Suzuki SX4
The 2010 Suzuki SX4 uses a 5x114.3 bolt pattern with a 60.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure the wheel is centered on the hub, preventing vibrations and stress on lug studs. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always verify lug nut compatibility: the SX4 requires 12x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts (e.g., ball seat or wrong thread) can lead to wheel detachment. For safety, avoid spacers unless professionally installed, and ensure all hardware meets OEM specifications.
Historical Fitment Data Reference
In our dataset, Suzuki SX4 appears from 2007 to 2013 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 60.1mm bore is critical for proper centering.
- ✅ Check inner clearance for aftermarket wheels; the SX4's strut clearance is tight, so offsets below 45mm may require spacers or modification.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
2010 Suzuki SX4 — Frequently Asked Questions
What is the bolt pattern for a 2010 Suzuki SX4?
The 2010 Suzuki SX4 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 50mm.
What other years of Suzuki SX4 have the same bolt pattern as the 2010?
The Suzuki SX4 uses the 5x114.3 pattern from 2007 through 2013. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Will wheels from another Suzuki fit my 2010 SX4?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
How tight should I torque the lug nuts on a 2010 Suzuki SX4?
Refer to your owner's manual for exact specs, but always tighten the B 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2010 Suzuki SX4?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 60.1mm (using hub rings if larger).
What is the PCD for a 2010 Suzuki SX4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 SX4, the PCD is 5x114.3.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →