2007 Suzuki SX4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Suzuki SX4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 SX4 — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Suzuki SX4's 5x114.3 bolt pattern era, which continued through 2013 (7 consecutive years). Wheels from any 2007–2013 Suzuki SX4 are cross-compatible with the 2007 model.
Suzuki SX4 Bolt Pattern by Year
The table below shows how the SX4's wheel specifications have changed over the years. The 2007 model year is highlighted.
Fitment Notes
The 2007 Suzuki SX4 has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Suzuki SX4 appears from 2007 to 2013 (7 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2007 Suzuki SX4 — Frequently Asked Questions
What is the bolt pattern for a 2007 Suzuki SX4?
The 2007 Suzuki SX4 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 50mm.
What other years of Suzuki SX4 have the same bolt pattern as the 2007?
The Suzuki SX4 uses the 5x114.3 pattern from 2007 through 2013. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What does 50mm offset mean for the 2007 SX4?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Suzuki.
Will wheels from another Suzuki fit my 2007 SX4?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
What is the PCD for a 2007 Suzuki SX4?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 SX4, the PCD is 5x114.3.
Do 2007 Suzuki SX4s use lug bolts or lug nuts?
The 2007 SX4 requires B 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Suzuki SX4 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2007-2013 (7 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Suzuki SX4, please report it via our About page contact so we can verify and update this record.