2026 Tesla Model Y Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Tesla Model Y is 5x114.3 (5x4.5"). It has a center bore of 64.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Cone seat, 21mm hex) fasteners tightened to 129 ft-lbs (175 Nm).
2026 Tesla Model Y Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 64.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 129 ft-lbs (175 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Model Y — Year-Specific Fitment Context
The 2026 model year is the final year of the Tesla Model Y's 5x114.3 bolt pattern run (since 2020). Wheels from any 2020–2026 Tesla Model Y are cross-compatible with the 2026 model.
Tesla Model Y Bolt Pattern by Year
Looking for all generations? View the complete Tesla Model Y (2020–2026) Bolt Pattern & Generation Guide →
The table below shows how the Model Y's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Tesla Model Y Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Tesla Model Y, donor rims must match the 5x114.3 PCD and have a center bore of at least 64.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 64.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Tesla Model 3 | 64.1 mm (Exact) | 35-45 | 14x1.5 (Cone) |
| 2025 Acura ADX | 64.1 mm (Exact) | 40 | 14x1.5 (Ball) |
| 2023 Acura ILX | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
| 2023 Acura Integra | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
| 2014 Acura MDX | 64.1 mm (Exact) | 45 | 12x1.5 (Ball) |
| 2025 Acura RDX | 64.1 mm (Exact) | 35-45 | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Maserati MC20 | 67.1 mm | 67.1mm → 64.1mm |
35-45 |
| 2021 Maserati Quattroporte | 78.1 mm | 78.1mm → 64.1mm |
45 |
| 2008 MAZDA B-Series Extended Cab | 67.1 mm | 67.1mm → 64.1mm |
45-50 |
| 2008 MAZDA B-Series Regular Cab | 67.1 mm | 67.1mm → 64.1mm |
45-50 |
| 2021 MAZDA CX-3 | 67.1 mm | 67.1mm → 64.1mm |
45-50 |
| 2025 MAZDA CX-30 | 67.1 mm | 67.1mm → 64.1mm |
45-50 |
Quick Tips & Safety Warnings
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 129 ft-lbs (175 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Tesla Model Y — Frequently Asked Questions
What is the bolt pattern for a 2026 Tesla Model Y?
The 2026 Tesla Model Y uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 35-45mm.
What other years of Tesla Model Y have the same bolt pattern as the 2026?
The Tesla Model Y uses the 5x114.3 pattern from 2020 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the center bore of a 2026 Tesla Model Y?
The factory center bore (hub bore) for the 2026 Tesla Model Y is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2026 Tesla Model Y?
The OEM offset for the 2026 Model Y is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 35-45mm offset mean for the 2026 Model Y?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Tesla.
How tight should I torque the lug nuts on a 2026 Tesla Model Y?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →