2018 Toyota 86 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Toyota 86, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35-48mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2018 86 — Year-Specific Fitment Context
The 2018 Toyota 86 is in year 2 of 7 using the 5x100 pattern (2017–2023). Wheels from any 2017–2023 Toyota 86 are cross-compatible with the 2018 model.
Toyota 86 Bolt Pattern by Year
The table below shows how the 86's wheel specifications have changed over the years. The 2018 model year is highlighted.
Fitment Notes
The 2018 Toyota 86 has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota 86 appears from 2017 to 2023 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
2018 Toyota 86 — Frequently Asked Questions
What is the bolt pattern for a 2018 Toyota 86?
The 2018 Toyota 86 uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35-48mmmm.
What other years of Toyota 86 have the same bolt pattern as the 2018?
The Toyota 86 uses the 5x100 pattern from 2017 through 2023. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the factory wheel offset for a 2018 Toyota 86?
The OEM offset for the 2018 86 is typically around 35-48mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2018 Toyota?
The 2018 86 uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2018 Toyota 86?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 35-48mmmm, and a center bore of at least 56.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2018 Toyota 86?
Refer to your owner's manual for exact specs, but always tighten the M12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota 86 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2017-2023 (6 model years).
- Observed bolt-pattern variants: 1 (5x100).
- Observed total offset span across years: 96.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2018 Toyota 86, please report it via our About page contact so we can verify and update this record.