2019 Toyota 86 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Toyota 86, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | M12x1.25 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35-48mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 86 — Year-Specific Fitment Context
The 2019 Toyota 86 is in year 3 of 7 using the 5x100 pattern (2017–2023). Wheels from any 2017–2023 Toyota 86 are cross-compatible with the 2019 model.
Toyota 86 Bolt Pattern by Year
The table below shows how the 86's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2019 Toyota 86
For the 2019 Toyota 86, the 5x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range is tight at 35-48mm; deviating can cause rubbing or clearance issues. Always use M12x1.25 lug nuts with the correct seat type—conical (60-degree) or ball seat—matching the wheel's design. Improper lug nuts can lead to wheel loosening. Verify all specs before purchase.
Historical Fitment Data Reference
In our dataset, Toyota 86 appears from 2017 to 2023 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid spacers unless necessary; they alter offset and may require longer studs.
- ✅ Check brake caliper clearance for aftermarket wheels, especially with larger rotors.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Toyota 86 — Frequently Asked Questions
What is the bolt pattern for a 2019 Toyota 86?
The 2019 Toyota 86 uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35-48mmmm.
What other years of Toyota 86 have the same bolt pattern as the 2019?
The Toyota 86 uses the 5x100 pattern from 2017 through 2023. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Do 2019 Toyota 86s use lug bolts or lug nuts?
The 2019 86 requires M12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 35-48mmmm offset mean for the 2019 86?
An offset of 35-48mmmm means the wheel's mounting surface is 35-48mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
How tight should I torque the lug nuts on a 2019 Toyota 86?
Refer to your owner's manual for exact specs, but always tighten the M12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Toyota fit my 2019 86?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset