2018 Toyota Camry Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Toyota Camry Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Camry Hybrid — Year-Specific Fitment Context
The 2018 Toyota Camry Hybrid is in year 2 of 8 using the 5x114.3 pattern (2017–2024). Wheels from any 2017–2024 Toyota Camry Hybrid are cross-compatible with the 2018 model.
Toyota Camry Hybrid Bolt Pattern by Year
The table below shows how the Camry Hybrid's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Toyota Camry Hybrid
The 2018 Toyota Camry Hybrid uses a 5x114.3 bolt pattern with a 60.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The offset range is 35-45mm; straying outside this can cause rubbing or clearance issues with suspension and brake components. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat, matching the wheel's design. Never mix seat types, as improper seating can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and torque lug nuts to manufacturer specifications.
Historical Fitment Data Reference
In our dataset, Toyota Camry Hybrid appears from 2017 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ Avoid wheels with a center bore larger than 60.1mm without hub-centric rings; plastic rings are acceptable for street use.
- ✅ Check for brake caliper clearance, especially with aftermarket wheels; the 2018 Camry Hybrid has larger front brakes than non-hybrid models.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Toyota Camry Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2018 Toyota Camry Hybrid?
The 2018 Toyota Camry Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Camry Hybrid have the same bolt pattern as the 2018?
The Toyota Camry Hybrid uses the 5x114.3 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2018 Toyota Camry Hybrid?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
Do 2018 Toyota Camry Hybrids use lug bolts or lug nuts?
The 2018 Camry Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 60.1mm center bore important for the 2018 Camry Hybrid?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2018 Toyota Camry Hybrid use?
The 2018 Toyota Camry Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset