2026 Toyota Camry Hybrid Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota Camry Hybrid is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat/Mag seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Toyota Camry Hybrid Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Camry Hybrid — Year-Specific Fitment Context
The 2026 model year is the final year of the Toyota Camry Hybrid's 5x114.3 bolt pattern run (since 2017). Wheels from any 2017–2026 Toyota Camry Hybrid are cross-compatible with the 2026 model.
Toyota Camry Hybrid Bolt Pattern by Year
Looking for all generations? View the complete Toyota Camry Hybrid (2017–2026) Bolt Pattern & Generation Guide →
The table below shows how the Camry Hybrid's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Toyota Camry Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Toyota Camry Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2022 Toyota Avalon | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat/Mag) |
| 2022 Toyota Avalon Hybrid | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat/Mag) |
| 2025 Toyota bZ4X | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2023 Toyota C-HR | 60.1 mm (Exact) | 35-50mm | M12x1.5 (Flat/Mag) |
| 1993 Toyota Camry | 60.1 mm (Exact) | 46 | N 12x1.50 (Flat/Mag) |
| 2009 Toyota Corolla | 60.1 mm (Exact) | 46 | N 12x1.50 (Flat/Mag) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Acura ADX | 64.1 mm | 64.1mm → 60.1mm |
40 |
| 2023 Acura ILX | 64.1 mm | 64.1mm → 60.1mm |
45 |
| 2023 Acura Integra | 64.1 mm | 64.1mm → 60.1mm |
45 |
| 2014 Acura MDX | 64.1 mm | 64.1mm → 60.1mm |
45 |
| 2025 Acura RDX | 64.1 mm | 64.1mm → 60.1mm |
35-45 |
| 2025 Acura TLX | 64.1 mm | 64.1mm → 60.1mm |
40-50 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Toyota Camry Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2026 Toyota Camry Hybrid?
The 2026 Toyota Camry Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Camry Hybrid have the same bolt pattern as the 2026?
The Toyota Camry Hybrid uses the 5x114.3 pattern from 2017 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Will wheels from another Toyota fit my 2026 Camry Hybrid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
How tight should I torque the lug nuts on a 2026 Toyota Camry Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 35-45mm offset mean for the 2026 Camry Hybrid?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
How do I measure the bolt pattern on my 2026 Toyota?
The 2026 Camry Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →