2017 Toyota Camry Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Toyota Camry Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2017 Camry Hybrid — Year-Specific Fitment Context
The 2017 model year marks the beginning of the Toyota Camry Hybrid's 5x114.3 bolt pattern era, which continued through 2024 (8 consecutive years). Wheels from any 2017–2024 Toyota Camry Hybrid are cross-compatible with the 2017 model.
Toyota Camry Hybrid Bolt Pattern by Year
The table below shows how the Camry Hybrid's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2017 Toyota Camry Hybrid
For the 2017 Toyota Camry Hybrid, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree). Ball-seat or incorrect thread pitch can lead to wheel loosening. Verify wheel bore and offset before purchase.
Historical Fitment Data Reference
In our dataset, Toyota Camry Hybrid appears from 2017 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal lug nuts; they may not seat properly on aftermarket wheels.
- ✅ Check inner clearance for brake calipers when using lower offset wheels (e.g., 35mm).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Toyota Camry Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2017 Toyota Camry Hybrid?
The 2017 Toyota Camry Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 46mm.
What other years of Toyota Camry Hybrid have the same bolt pattern as the 2017?
The Toyota Camry Hybrid uses the 5x114.3 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the factory wheel offset for a 2017 Toyota Camry Hybrid?
The OEM offset for the 2017 Camry Hybrid is typically around 46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2017 Toyota Camry Hybrid?
The factory center bore (hub bore) for the 2017 Toyota Camry Hybrid is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2017 Toyota Camry Hybrid use?
The 2017 Toyota Camry Hybrid uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What does 46mm offset mean for the 2017 Camry Hybrid?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset