2002 Toyota Celica Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Toyota Celica, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2002 Celica — Year-Specific Fitment Context
The 2002 Toyota Celica is in year 10 of 13 using the 5x100 pattern (1993–2005). Wheels from any 1993–2005 Toyota Celica are cross-compatible with the 2002 model. Across its full production run (1992–2005), the Celica has also used: 4x100.
Toyota Celica Bolt Pattern by Year
The table below shows how the Celica's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x100 | 54.1 | 40 |
| 1993 | 5x100 | 54.1 | 40 |
| 1994 | 5x100 | 54.1 | 40 |
| 1995 | 5x100 | 54.1 | 40 |
| 1996 | 5x100 | 54.1 | 40 |
| 1997 | 5x100 | 54.1 | 40 |
| 1998 | 5x100 | 54.1 | 40 |
| 1999 | 5x100 | 54.1 | 40 |
| 2000 | 5x100 | 54.1 | 40 |
| 2001 | 5x100 | 54.1 | 40 |
| ▸ 2002 | 5x100 | 54.1 | 40 |
| 2003 | 5x100 | 54.1 | 40 |
| 2004 | 5x100 | 54.1 | 40 |
| 2005 | 5x100 | 54.1 | 40 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2002 Toyota Celica
For your 2002 Toyota Celica, the bolt pattern is 5x100 with a critical center bore of 54.1mm. Aftermarket wheels often have a larger bore (e.g., 73.1mm), so hub-centric rings are mandatory to prevent vibration and ensure proper load transfer. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch: M12x1.50. Use conical (60-degree) seat lug nuts for aftermarket wheels; ball-seat nuts are for OEM only. Improper seating can lead to wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota Celica appears from 1992 to 2005 (14 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x100).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving.
- ✅ When using aftermarket wheels, always install hub-centric rings (54.1mm to wheel bore) to avoid vibrations.
- ✅ Check for brake caliper clearance when changing offset; 40mm is safe, but lower offsets may require spacers or caliper grinding.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Toyota Celica — Frequently Asked Questions
What is the bolt pattern for a 2002 Toyota Celica?
The 2002 Toyota Celica uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 40mm.
What other years of Toyota Celica have the same bolt pattern as the 2002?
The Toyota Celica uses the 5x100 pattern from 1993 through 2005. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
Do 2002 Toyota Celicas use lug bolts or lug nuts?
The 2002 Celica requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2002 Toyota Celica?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 40mm offset mean for the 2002 Celica?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What is the factory wheel offset for a 2002 Toyota Celica?
The OEM offset for the 2002 Celica is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset