2000 Toyota Celica Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Toyota Celica, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2000 Celica — Year-Specific Fitment Context
The 2000 Toyota Celica is in year 8 of 13 using the 5x100 pattern (1993–2005). Wheels from any 1993–2005 Toyota Celica are cross-compatible with the 2000 model. Across its full production run (1992–2005), the Celica has also used: 4x100.
Toyota Celica Bolt Pattern by Year
The table below shows how the Celica's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 4x100 | 54.1 | 40 |
| 1993 | 5x100 | 54.1 | 40 |
| 1994 | 5x100 | 54.1 | 40 |
| 1995 | 5x100 | 54.1 | 40 |
| 1996 | 5x100 | 54.1 | 40 |
| 1997 | 5x100 | 54.1 | 40 |
| 1998 | 5x100 | 54.1 | 40 |
| 1999 | 5x100 | 54.1 | 40 |
| ▸ 2000 | 5x100 | 54.1 | 40 |
| 2001 | 5x100 | 54.1 | 40 |
| 2002 | 5x100 | 54.1 | 40 |
| 2003 | 5x100 | 54.1 | 40 |
| 2004 | 5x100 | 54.1 | 40 |
| 2005 | 5x100 | 54.1 | 40 |
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2000 Toyota Celica
For your 2000 Toyota Celica (5x100 bolt pattern, 54.1mm center bore, 40mm offset), aftermarket wheels require hub-centric rings to avoid vibration. The 40mm offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and proper seat type (cone or ball seat) to ensure safe clamping. Never reuse old lug nuts with new wheels. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota Celica appears from 1992 to 2005 (14 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x100).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub rings; they can cause vibration and unsafe fitment.
- ✅ Check inner clearance for aftermarket wheels; 17x7.5" with 40mm offset is a common safe upgrade.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Toyota Celica — Frequently Asked Questions
What is the bolt pattern for a 2000 Toyota Celica?
The 2000 Toyota Celica uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 40mm.
What other years of Toyota Celica have the same bolt pattern as the 2000?
The Toyota Celica uses the 5x100 pattern from 1993 through 2005. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What lug nut size does the 2000 Toyota Celica use?
The 2000 Toyota Celica uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2000 Toyota Celica?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2000 Toyota?
The 2000 Celica uses a 5x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2000 Toyota Celica?
Yes, but ensure the wheel spacers match the 5x100 bolt pattern and 54.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset