2025 Toyota Crown Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota Crown is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).

2025 Toyota Crown Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 60.1 mm
Offset Range (ET) 35-45
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 76 ft-lbs (103 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2025 Crown — Year-Specific Fitment Context

The 2025 Toyota Crown is in year 3 of 4 using the 5x114.3 pattern (2023–2026). Wheels from any 2023–2026 Toyota Crown are cross-compatible with the 2025 model.

Toyota Crown Bolt Pattern by Year

Looking for all generations? View the complete Toyota Crown (2023–2026) Bolt Pattern & Generation Guide →

The table below shows how the Crown's wheel specifications have changed over the years. The 2025 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2023 5x114.3 60.1 35-45
2024 5x114.3 60.1 35-45
▸ 2025 5x114.3 60.1 35-45
2026 5x114.3 60.1 35-45

2025 Toyota Crown Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Toyota Crown, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Ram 1000 60.1 mm (Exact) 40 12x1.5 (Flat)
2008 Saturn VUE 60.1 mm (Exact) 40 12x1.5 (Cone)
2016 Scion iM 60.1 mm (Exact) 35-45mm M12x1.5 (Cone)
2011 Scion tC 60.1 mm (Exact) 39 12x1.5 (Cone)
2008 Scion xB 60.1 mm (Exact) 45 12x1.5 (Cone)
2025 Subaru Solterra 60.1 mm (Exact) 40 12x1.5 (Flat)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2026 Maserati Grancabrio 67.1 mm 67.1mm → 60.1mm 35-45
2025 Maserati GranTurismo 67.1 mm 67.1mm → 60.1mm 35-45
2024 Maserati Levante 67.1 mm 67.1mm → 60.1mm 45
2025 Maserati MC20 67.1 mm 67.1mm → 60.1mm 35-45
2021 Maserati Quattroporte 78.1 mm 78.1mm → 60.1mm 45
2008 MAZDA B-Series Extended Cab 67.1 mm 67.1mm → 60.1mm 45-50
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2025 Toyota Crown — Frequently Asked Questions

What is the bolt pattern for a 2025 Toyota Crown?

The 2025 Toyota Crown uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.

What other years of Toyota Crown have the same bolt pattern as the 2025?

The Toyota Crown uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.

What is the factory wheel offset for a 2025 Toyota Crown?

The OEM offset for the 2025 Crown is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What does 35-45mm offset mean for the 2025 Crown?

An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.

Will wheels from another Toyota fit my 2025 Crown?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.

Can I put aftermarket wheels on my 2025 Toyota Crown?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Toyota Crown By Year

2023 2024 2025 2026

Other Toyota Models

C-HR Celica Corolla Cross Corolla Cross Hybrid Echo Grand Highlander Hybrid MR2 Prius Prius Prime (PHEV) RAV4 Hybrid RAV4 Prime RAV4 Prime (PHEV) Regular Cab T100 Xtracab Tacoma XtraCab Tundra CrewMax Tundra Regular Cab Venza Yaris Hatchback bZ4X

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)