2026 Toyota Crown Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota Crown is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 14x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).

2026 Toyota Crown Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 60.1 mm
Offset Range (ET) 35-45
Thread Size (Lug Nut / Bolt) 14x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 76 ft-lbs (103 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 Crown — Year-Specific Fitment Context

The 2026 model year is the final year of the Toyota Crown's 5x114.3 bolt pattern run (since 2023). Wheels from any 2023–2026 Toyota Crown are cross-compatible with the 2026 model.

Toyota Crown Bolt Pattern by Year

Looking for all generations? View the complete Toyota Crown (2023–2026) Bolt Pattern & Generation Guide →

The table below shows how the Crown's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2023 5x114.3 60.1 35-45
2024 5x114.3 60.1 35-45
2025 5x114.3 60.1 35-45
▸ 2026 5x114.3 60.1 35-45

2026 Toyota Crown Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Toyota Crown, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2024 Ram 1000 60.1 mm (Exact) 40 12x1.5 (Flat)
2008 Saturn VUE 60.1 mm (Exact) 40 12x1.5 (Cone)
2016 Scion iM 60.1 mm (Exact) 35-45mm M12x1.5 (Cone)
2011 Scion tC 60.1 mm (Exact) 39 12x1.5 (Cone)
2008 Scion xB 60.1 mm (Exact) 45 12x1.5 (Cone)
2025 Subaru Solterra 60.1 mm (Exact) 40 12x1.5 (Flat)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2021 Lotus Evora GT 68.0 mm 68.0mm → 60.1mm 50-60mm
2024 Maserati Ghibli 67.1 mm 67.1mm → 60.1mm 45
2025 Maserati Grancabrio 67.1 mm 67.1mm → 60.1mm 35-45
2025 Maserati GranTurismo 67.1 mm 67.1mm → 60.1mm 35-45
2024 Maserati Levante 67.1 mm 67.1mm → 60.1mm 45
2025 Maserati MC20 67.1 mm 67.1mm → 60.1mm 35-45
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 Toyota Crown — Frequently Asked Questions

What is the bolt pattern for a 2026 Toyota Crown?

The 2026 Toyota Crown uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.

What other years of Toyota Crown have the same bolt pattern as the 2026?

The Toyota Crown uses the 5x114.3 pattern from 2023 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

Do 2026 Toyota Crowns use lug bolts or lug nuts?

The 2026 Crown requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

How do I measure the bolt pattern on my 2026 Toyota?

The 2026 Crown uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

Can I put aftermarket wheels on my 2026 Toyota Crown?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).

What does 35-45mm offset mean for the 2026 Crown?

An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Toyota Crown By Year

2023 2024 2025 2026

Other Toyota Models

86 C-HR Corolla Cross Hybrid Corolla Hatchback Corolla Hybrid Corolla iM Cressida Crown Signia GR Corolla Grand Highlander Highlander Hybrid RAV4 Hybrid RAV4 Prime (PHEV) Solara T100 Regular Cab Tacoma XtraCab Tundra CrewMax Tundra Regular Cab Yaris Hatchback Yaris iA

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)