2021 Toyota GR Supra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Toyota GR Supra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.25 |
| Center Bore (CB) | 66.6 mm |
| Offset (ET) | 30 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 GR Supra — Year-Specific Fitment Context
The 2021 Toyota GR Supra is in year 2 of 5 using the 5x112 pattern (2020–2024). Wheels from any 2020–2024 Toyota GR Supra are cross-compatible with the 2021 model.
Toyota GR Supra Bolt Pattern by Year
The table below shows how the GR Supra's wheel specifications have changed over the years. The 2021 model year is highlighted.
Fitment Notes
The 2021 Toyota GR Supra has a bolt pattern of 5x112.
This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota GR Supra appears from 2020 to 2024 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
2021 Toyota GR Supra — Frequently Asked Questions
What is the bolt pattern for a 2021 Toyota GR Supra?
The 2021 Toyota GR Supra uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 66.6mm and the offset is 30mm.
What other years of Toyota GR Supra have the same bolt pattern as the 2021?
The Toyota GR Supra uses the 5x112 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What is the factory wheel offset for a 2021 Toyota GR Supra?
The OEM offset for the 2021 GR Supra is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2021 Toyota GR Supra?
Refer to your owner's manual for exact specs, but always tighten the 14x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2021 Toyota GR Supra use?
The 2021 Toyota GR Supra uses 14x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 66.6mm center bore important for the 2021 GR Supra?
The 66.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota GR Supra is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2020-2024 (5 model years).
- Observed bolt-pattern variants: 1 (5x112).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2021 Toyota GR Supra, please report it via our About page contact so we can verify and update this record.