2006 Toyota Matrix Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Toyota Matrix, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 Matrix — Year-Specific Fitment Context
The 2006 Toyota Matrix is in year 4 of 11 using the 5x100 pattern (2003–2013). Wheels from any 2003–2013 Toyota Matrix are cross-compatible with the 2006 model.
Toyota Matrix Bolt Pattern by Year
The table below shows how the Matrix's wheel specifications have changed over the years. The 2006 model year is highlighted.
Fitment Notes
The 2006 Toyota Matrix has a bolt pattern of 5x100.
This means it is a 5 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Matrix appears from 2003 to 2013 (11 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
2006 Toyota Matrix — Frequently Asked Questions
What is the bolt pattern for a 2006 Toyota Matrix?
The 2006 Toyota Matrix uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 45mm.
What other years of Toyota Matrix have the same bolt pattern as the 2006?
The Toyota Matrix uses the 5x100 pattern from 2003 through 2013. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Do 2006 Toyota Matrixs use lug bolts or lug nuts?
The 2006 Matrix requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2006 Toyota Matrix?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 Matrix, the PCD is 5x100.
Can I put aftermarket wheels on my 2006 Toyota Matrix?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 45mm, and a center bore of at least 54.1mm (using hub rings if larger).
Will wheels from another Toyota fit my 2006 Matrix?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 54.1mm.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota Matrix is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2003-2013 (11 model years).
- Observed bolt-pattern variants: 1 (5x100).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2006 Toyota Matrix, please report it via our About page contact so we can verify and update this record.