2009 Toyota Matrix Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Toyota Matrix, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2009 Matrix — Year-Specific Fitment Context
The 2009 Toyota Matrix is in year 7 of 11 using the 5x100 pattern (2003–2013). Wheels from any 2003–2013 Toyota Matrix are cross-compatible with the 2009 model.
Toyota Matrix Bolt Pattern by Year
The table below shows how the Matrix's wheel specifications have changed over the years. The 2009 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2009 Toyota Matrix
For your 2009 Toyota Matrix, the bolt pattern is 5x100 with a critical center bore of 54.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat, matching your wheel's design. Improper lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota Matrix appears from 2003 to 2013 (11 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with offset below 40mm to prevent fender rubbing.
- ✅ Check that aftermarket wheels clear the brake calipers; some 17-inch designs may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Toyota Matrix — Frequently Asked Questions
What is the bolt pattern for a 2009 Toyota Matrix?
The 2009 Toyota Matrix uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 45mm.
What other years of Toyota Matrix have the same bolt pattern as the 2009?
The Toyota Matrix uses the 5x100 pattern from 2003 through 2013. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2009 Toyota Matrix?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2009 Toyota Matrix?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 45mm, and a center bore of at least 54.1mm (using hub rings if larger).
What is the center bore of a 2009 Toyota Matrix?
The factory center bore (hub bore) for the 2009 Toyota Matrix is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2009 Toyota Matrix?
The OEM offset for the 2009 Matrix is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset