1997 Toyota Previa Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Toyota Previa, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 60.1 mm
Offset (ET) 46
Torque Specs 80 ft-lbs (108 Nm)

1997 Previa — Year-Specific Fitment Context

The 1997 model year is the final year of the Toyota Previa's 5x114.3 bolt pattern run (since 1992). Wheels from any 1992–1997 Toyota Previa are cross-compatible with the 1997 model.

Toyota Previa Bolt Pattern by Year

The table below shows how the Previa's wheel specifications have changed over the years. The 1997 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 5x114.3 60.1 46
1993 5x114.3 60.1 46
1994 5x114.3 60.1 46
1995 5x114.3 60.1 46
1996 5x114.3 60.1 46
▸ 1997 5x114.3 60.1 46

Fitment Notes

The 1997 Toyota Previa has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Toyota Previa appears from 1992 to 1997 (6 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

1997 Toyota Previa — Frequently Asked Questions

What is the bolt pattern for a 1997 Toyota Previa?

The 1997 Toyota Previa uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 46mm.

What other years of Toyota Previa have the same bolt pattern as the 1997?

The Toyota Previa uses the 5x114.3 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.

What is the center bore of a 1997 Toyota Previa?

The factory center bore (hub bore) for the 1997 Toyota Previa is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Will wheels from another Toyota fit my 1997 Previa?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.

Do 1997 Toyota Previas use lug bolts or lug nuts?

The 1997 Previa requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What does 46mm offset mean for the 1997 Previa?

An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Toyota Previa is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1997 Toyota Previa, please report it via our About page contact so we can verify and update this record.

Toyota Previa By Year

1992 1993 1994 1995 1996 1997

Other Toyota Models

Celica Corolla Cross Corolla Cross Hybrid Corolla Hybrid GR86 Grand Highlander Hybrid Matrix Mirai Paseo Prius RAV4 RAV4 Hybrid RAV4 Prime Solara T100 Regular Cab Tacoma Access Cab Tacoma XtraCab Tacoma Xtracab Yaris Yaris Hatchback