2025 Toyota RAV4 Hybrid Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota RAV4 Hybrid is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat/Mag seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2025 Toyota RAV4 Hybrid Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 RAV4 Hybrid — Year-Specific Fitment Context
The 2025 Toyota RAV4 Hybrid is in year 9 of 10 using the 5x114.3 pattern (2017–2026). Wheels from any 2017–2026 Toyota RAV4 Hybrid are cross-compatible with the 2025 model.
Toyota RAV4 Hybrid Bolt Pattern by Year
Looking for all generations? View the complete Toyota RAV4 Hybrid (2017–2026) Bolt Pattern & Generation Guide →
The table below shows how the RAV4 Hybrid's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Toyota RAV4 Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Toyota RAV4 Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus ES | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2020 Lexus GS | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat/Mag) |
| 2007 Lexus GX | 60.1 mm (Exact) | 25 | N 12x1.50 (Flat/Mag) |
| 2025 Lexus IS | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Lexus NX | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Lexus RC | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2026 Ferrari 296 | 67.1 mm | 67.1mm → 60.1mm |
Not Applicable |
| 2022 Ferrari 296 GTB | 67.1 mm | 67.1mm → 60.1mm |
45 |
| 2015 Ferrari 458 Italia | 67.1 mm | 67.1mm → 60.1mm |
45 front, 58 rear |
| 2015 Ferrari 458 Speciale | 67.1 mm | 67.1mm → 60.1mm |
45 front, 48 rear |
| 2015 Ferrari 458 Spider | 67.1 mm | 67.1mm → 60.1mm |
45 front, 58 rear |
| 2019 Ferrari 488 GTB | 67.1 mm | 67.1mm → 60.1mm |
45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Toyota RAV4 Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2025 Toyota RAV4 Hybrid?
The 2025 Toyota RAV4 Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota RAV4 Hybrid have the same bolt pattern as the 2025?
The Toyota RAV4 Hybrid uses the 5x114.3 pattern from 2017 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2025 Toyota RAV4 Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2025 Toyota RAV4 Hybrid?
The OEM offset for the 2025 RAV4 Hybrid is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 35-45mm offset mean for the 2025 RAV4 Hybrid?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Can I use spacers on my 2025 Toyota RAV4 Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →