2026 Toyota RAV4 Hybrid Bolt Pattern

Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota RAV4 Hybrid is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat/Mag seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).

2026 Toyota RAV4 Hybrid Wheel Fitment Specs

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Center Bore (Hub Bore) 60.1 mm
Offset Range (ET) 35-45
Thread Size (Lug Nut / Bolt) 12x1.5
Fastener Seat Type Flat / Mag Seat (Washer)
Lug Wrench / Socket Hex Size 21mm
Wheel Torque Specs 80 ft-lbs (108 Nm)
💡

Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.

🛠️ Managing a shop, wheel inventory, or app? Stop searching one by one.
Download 12,902 Vehicle Database (CSV) →
🔍 Check fitment for other vehicles using our Ultimate Bolt Pattern Finder tool →

2026 RAV4 Hybrid — Year-Specific Fitment Context

The 2026 model year is the final year of the Toyota RAV4 Hybrid's 5x114.3 bolt pattern run (since 2017). Wheels from any 2017–2026 Toyota RAV4 Hybrid are cross-compatible with the 2026 model.

Toyota RAV4 Hybrid Bolt Pattern by Year

Looking for all generations? View the complete Toyota RAV4 Hybrid (2017–2026) Bolt Pattern & Generation Guide →

The table below shows how the RAV4 Hybrid's wheel specifications have changed over the years. The 2026 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2017 5x114.3 60.1 46
2018 5x114.3 60.1 35-45
2019 5x114.3 60.1 35-45
2020 5x114.3 60.1 35-45
2021 5x114.3 60.1 35-45
2022 5x114.3 60.1 35-45
2023 5x114.3 60.1 35-45
2024 5x114.3 60.1 35-45
2025 5x114.3 60.1 35-45
▸ 2026 5x114.3 60.1 35-45

2026 Toyota RAV4 Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)

The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Toyota RAV4 Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:

DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)

Compatible Donor Vehicle Center Bore OEM Offset (ET) Lug Thread & Seat
2022 Toyota Avalon 60.1 mm (Exact) 35-45 12x1.5 (Flat/Mag)
2022 Toyota Avalon Hybrid 60.1 mm (Exact) 35-45 12x1.5 (Flat/Mag)
2025 Toyota bZ4X 60.1 mm (Exact) 40 12x1.5 (Flat)
2023 Toyota C-HR 60.1 mm (Exact) 35-50mm M12x1.5 (Flat/Mag)
1993 Toyota Camry 60.1 mm (Exact) 46 N 12x1.50 (Flat/Mag)
2025 Toyota Camry Hybrid 60.1 mm (Exact) 35-45 12x1.5 (Flat/Mag)

HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)

Donor Vehicle Donor Bore Required Hub Ring (OD → ID) OEM Offset (ET)
2025 Tesla Model Y 64.1 mm 64.1mm → 60.1mm 35-45
2002 Toyota 4Runner 106.1 mm 106.1mm → 60.1mm 12
2025 Acura ADX 64.1 mm 64.1mm → 60.1mm 40
2023 Acura ILX 64.1 mm 64.1mm → 60.1mm 45
2023 Acura Integra 64.1 mm 64.1mm → 60.1mm 45
2014 Acura MDX 64.1 mm 64.1mm → 60.1mm 45
Looking for all models? View the complete directory of vehicles with 5x114.3 bolt pattern →

Quick Tips & Safety Warnings

Ready to upgrade or perform maintenance?

🛒 Shop Tools & Accessories on Amazon

As an Amazon Associate, I earn from qualifying purchases.

2026 Toyota RAV4 Hybrid — Frequently Asked Questions

What is the bolt pattern for a 2026 Toyota RAV4 Hybrid?

The 2026 Toyota RAV4 Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.

What other years of Toyota RAV4 Hybrid have the same bolt pattern as the 2026?

The Toyota RAV4 Hybrid uses the 5x114.3 pattern from 2017 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.

What is the factory wheel offset for a 2026 Toyota RAV4 Hybrid?

The OEM offset for the 2026 RAV4 Hybrid is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Can I put aftermarket wheels on my 2026 Toyota RAV4 Hybrid?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).

What is the center bore of a 2026 Toyota RAV4 Hybrid?

The factory center bore (hub bore) for the 2026 Toyota RAV4 Hybrid is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Will wheels from another Toyota fit my 2026 RAV4 Hybrid?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.

For Tire & Wheel Shops, Shopify Stores & Developers

Running a Tire Shop or Wheel Store?

Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.

Get Master Spreadsheet (CSV) →
Confidence Level
Medium
Verified Source
Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last Updated
2026-11-18

Toyota RAV4 Hybrid By Year

2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Other Toyota Models

86 Camry Corolla Hatchback Corolla iM Echo FJ Cruiser GR86 Prius Prime Prius Prime (PHEV) RAV4 Hybrid RAV4 Prime RAV4 Prime (PHEV) Regular Cab T100 Regular Cab Tacoma Tercel Tundra Access Cab Tundra Hybrid CrewMax Xtra Cab Yaris iA

Popular Vehicle Fitment

▶ Ford Mustang Specs ▶ Chevy Tahoe Specs ▶ Honda Civic Specs ▶ Ford F-150 Specs ▶ Toyota Camry Specs

Common Bolt Patterns

▶ 5x114.3 (5x4.5") ▶ 6x139.7 (6x5.5") ▶ 5x120 ▶ 5x127 (5x5") ▶ 5x112 (European)