2019 Toyota RAV4 Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Toyota RAV4 Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 RAV4 Hybrid — Year-Specific Fitment Context
The 2019 Toyota RAV4 Hybrid is in year 3 of 8 using the 5x114.3 pattern (2017–2024). Wheels from any 2017–2024 Toyota RAV4 Hybrid are cross-compatible with the 2019 model.
Toyota RAV4 Hybrid Bolt Pattern by Year
The table below shows how the RAV4 Hybrid's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Toyota RAV4 Hybrid
For the 2019 Toyota RAV4 Hybrid, the 5x114.3 bolt pattern is shared with 2017–2024 models, ensuring cross-compatibility. The 60.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibrations. Offset must stay within 35-45mm; deviating risks rubbing or poor handling. Always use 12x1.5 lug nuts with the correct seat (conical 60-degree for most aftermarket wheels; OEM uses ball seat). Verify lug nut engagement—at least 6-8 full turns. Re-torque after 50-100 miles. Avoid spacers unless hub-centric and properly torqued. Incorrect fitment compromises safety and ABS/TPMS function.
Historical Fitment Data Reference
In our dataset, Toyota RAV4 Hybrid appears from 2017 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving.
- ✅ Aftermarket wheels often require hub-centric rings (60.1mm ID to 73.1mm or larger OD).
- ✅ Check for caliper clearance with 18-19 inch wheels; some designs may need spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Toyota RAV4 Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2019 Toyota RAV4 Hybrid?
The 2019 Toyota RAV4 Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota RAV4 Hybrid have the same bolt pattern as the 2019?
The Toyota RAV4 Hybrid uses the 5x114.3 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Why is matching the 60.1mm center bore important for the 2019 RAV4 Hybrid?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2019 Toyota RAV4 Hybrid use?
The 2019 Toyota RAV4 Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2019 Toyota RAV4 Hybrid?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
What is the center bore of a 2019 Toyota RAV4 Hybrid?
The factory center bore (hub bore) for the 2019 Toyota RAV4 Hybrid is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset