1999 Toyota Solara Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Toyota Solara, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size M12x1.5
Center Bore (CB) 60.1 mm
Offset (ET) 35-45mm
Torque Specs 80 ft-lbs (108 Nm)

1999 Solara — Year-Specific Fitment Context

The 1999 model year marks the beginning of the Toyota Solara's 5x114.3 bolt pattern era, which continued through 2008 (10 consecutive years). Wheels from any 1999–2008 Toyota Solara are cross-compatible with the 1999 model.

Toyota Solara Bolt Pattern by Year

The table below shows how the Solara's wheel specifications have changed over the years. The 1999 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 1999 5x114.3 60.1 35-45mm
2000 5x114.3 60.1 35-45mm
2001 5x114.3 60.1 35-45mm
2002 5x114.3 60.1 35-45mm
2003 5x114.3 60.1 35-45mm
2004 5x114.3 60.1 35-45mm
2005 5x114.3 60.1 35-45mm
2006 5x114.3 60.1 35-45mm
2007 5x114.3 60.1 35-45mm
2008 5x114.3 60.1 35-45mm

Fitment Notes

The 1999 Toyota Solara has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Toyota Solara appears from 1999 to 2008 (10 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

1999 Toyota Solara — Frequently Asked Questions

What is the bolt pattern for a 1999 Toyota Solara?

The 1999 Toyota Solara uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mmmm.

What other years of Toyota Solara have the same bolt pattern as the 1999?

The Toyota Solara uses the 5x114.3 pattern from 1999 through 2008. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.

How do I measure the bolt pattern on my 1999 Toyota?

The 1999 Solara uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

Do 1999 Toyota Solaras use lug bolts or lug nuts?

The 1999 Solara requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Will wheels from another Toyota fit my 1999 Solara?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.

What lug nut size does the 1999 Toyota Solara use?

The 1999 Toyota Solara uses M12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Toyota Solara is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1999 Toyota Solara, please report it via our About page contact so we can verify and update this record.

Toyota Solara By Year

1999 2000 2001 2002 2003 2004 2005 2006 2007 2008

Other Toyota Models

4Runner 86 Camry Hybrid Celica Corolla Corolla Cross Corolla Cross Hybrid Cressida Crown FJ Cruiser Paseo Prius v RAV4 Hybrid Tacoma Double Cab Tacoma XtraCab Tundra CrewMax Tundra Double Cab Tundra Regular Cab Xtra Cab Yaris iA