2007 Volkswagen Eos Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Volkswagen Eos, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 Eos — Year-Specific Fitment Context
The 2007 model year marks the beginning of the Volkswagen Eos's 5x112 bolt pattern era, which continued through 2016 (10 consecutive years). Wheels from any 2007–2016 Volkswagen Eos are cross-compatible with the 2007 model.
Volkswagen Eos Bolt Pattern by Year
The table below shows how the Eos's wheel specifications have changed over the years. The 2007 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2007 Volkswagen Eos
For your 2007 Volkswagen Eos, the bolt pattern is 5x112, center bore 57.1mm, and offset range 45-50mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibrations and ensure proper load distribution. The offset is critical: staying within 45-50mm maintains suspension geometry and prevents rubbing. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—either conical (60-degree) or ball seat, as specified by the wheel manufacturer. Mixing seat types can cause wheel loosening. Re-torque lug nuts after 50-100 miles of driving. Avoid wheels with a smaller center bore, as they cannot be machined to fit.
Historical Fitment Data Reference
In our dataset, Volkswagen Eos appears from 2007 to 2016 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 90 ft-lb after 50-100 miles of driving.
- ✅ Verify wheel offset with a test fit; offsets outside 45-50mm may require fender rolling or spacers.
- ✅ Use only 14x1.5 lug nuts with the correct seat type (conical or ball) to match the wheel.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Volkswagen Eos — Frequently Asked Questions
What is the bolt pattern for a 2007 Volkswagen Eos?
The 2007 Volkswagen Eos uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45-50mm.
What other years of Volkswagen Eos have the same bolt pattern as the 2007?
The Volkswagen Eos uses the 5x112 pattern from 2007 through 2016. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What lug nut size does the 2007 Volkswagen Eos use?
The 2007 Volkswagen Eos uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2007 Volkswagen Eos?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2007 Volkswagen?
The 2007 Eos uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2007 Volkswagen Eos?
Absolutely. Just ensure the aftermarket wheels have a 5x112 bolt pattern, an offset near 45-50mm, and a center bore of at least 57.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset