2008 Volkswagen Rabbit Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Volkswagen Rabbit, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 Rabbit — Year-Specific Fitment Context
The 2008 Volkswagen Rabbit is in year 3 of 4 using the 5x112 pattern (2006–2009). Wheels from any 2006–2009 Volkswagen Rabbit are cross-compatible with the 2008 model.
Volkswagen Rabbit Bolt Pattern by Year
The table below shows how the Rabbit's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2008 Volkswagen Rabbit
For your 2008 Volkswagen Rabbit, the 5x112 bolt pattern and 57.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 66.6mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 45-50mm; deviations risk rubbing suspension or fenders. Always use lug nuts with the correct 14x1.5 thread pitch and seat type—factory wheels use ball seats, while aftermarket may require conical (60-degree) or ball seats. Mismatched seats can cause wheel loosening. Verify lug nut engagement (minimum 6-8 full turns) and torque to 88 ft-lbs. Re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Volkswagen Rabbit appears from 2006 to 2009 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings (57.1mm ID to wheel's bore) to avoid vibrations and center the wheel properly.
- ✅ Re-torque lug nuts to 88 ft-lbs after 50 miles of driving, as wheels can settle.
- ✅ Avoid spacers unless necessary; if used, ensure extended studs and proper offset to maintain scrub radius.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Volkswagen Rabbit — Frequently Asked Questions
What is the bolt pattern for a 2008 Volkswagen Rabbit?
The 2008 Volkswagen Rabbit uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45-50mm.
What other years of Volkswagen Rabbit have the same bolt pattern as the 2008?
The Volkswagen Rabbit uses the 5x112 pattern from 2006 through 2009. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2008 Volkswagen?
The 2008 Rabbit uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2008 Volkswagen Rabbit use?
The 2008 Volkswagen Rabbit uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2008 Volkswagen Rabbit?
The factory center bore (hub bore) for the 2008 Volkswagen Rabbit is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2008 Volkswagen Rabbit?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset