2009 Volkswagen Rabbit Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Volkswagen Rabbit, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2009 Rabbit — Year-Specific Fitment Context
The 2009 model year is the final year of the Volkswagen Rabbit's 5x112 bolt pattern run (since 2006). Wheels from any 2006–2009 Volkswagen Rabbit are cross-compatible with the 2009 model.
Volkswagen Rabbit Bolt Pattern by Year
The table below shows how the Rabbit's wheel specifications have changed over the years. The 2009 model year is highlighted.
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
Expert Buying Guide for 2009 Volkswagen Rabbit
For your 2009 Volkswagen Rabbit, the bolt pattern is 5x112 with a center bore of 57.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 45-50mm; deviating may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—either conical (60-degree) or ball seat, as specified by the wheel manufacturer. Improper lug nuts can lead to wheel loosening. Verify compatibility with 2006-2008 Rabbit wheels, as they share the same specifications.
Historical Fitment Data Reference
In our dataset, Volkswagen Rabbit appears from 2006 to 2009 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on wheel bearings.
- ✅ Check for brake caliper clearance when using wheels with offset near 45mm, as some aftermarket calipers may interfere.
- ⚠️ Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Volkswagen Rabbit — Frequently Asked Questions
What is the bolt pattern for a 2009 Volkswagen Rabbit?
The 2009 Volkswagen Rabbit uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45-50mm.
What other years of Volkswagen Rabbit have the same bolt pattern as the 2009?
The Volkswagen Rabbit uses the 5x112 pattern from 2006 through 2009. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
Why is matching the 57.1mm center bore important for the 2009 Rabbit?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2009 Volkswagen?
The 2009 Rabbit uses a 5x112 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2009 Volkswagen Rabbit?
The OEM offset for the 2009 Rabbit is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2009 Volkswagen Rabbit?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2009 Rabbit, the PCD is 5x112.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset