1992 Volvo 960 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Volvo 960, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1992 960 — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Volvo 960's 5x108 bolt pattern era, which continued through 1997 (6 consecutive years). Wheels from any 1992–1997 Volvo 960 are cross-compatible with the 1992 model.
Volvo 960 Bolt Pattern by Year
The table below shows how the 960's wheel specifications have changed over the years. The 1992 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 1992 Volvo 960
For your 1992 Volvo 960, the bolt pattern is 5x108 with a center bore of 63.4mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The offset is critical: stock is 50mm; deviations affect handling and clearance. Avoid offsets below 35mm to prevent rubbing on struts. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—Volvo uses ball seats, not conical. Mismatched lug nuts can cause wheel loss. Verify wheel load rating meets or exceeds OEM specifications. For staggered fitments, test fitment on front and rear axles.
Historical Fitment Data Reference
In our dataset, Volvo 960 appears from 1992 to 1997 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Check for caliper clearance when using wheels with spokes that curve inward; some aftermarket designs may interfere.
- ✅ If using wheels with a different center bore, use 63.4mm hub-centric rings to avoid vibrations and ensure proper load transfer.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Volvo 960 — Frequently Asked Questions
What is the bolt pattern for a 1992 Volvo 960?
The 1992 Volvo 960 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Volvo 960 have the same bolt pattern as the 1992?
The Volvo 960 uses the 5x108 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What is the PCD for a 1992 Volvo 960?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 960, the PCD is 5x108.
Can I use spacers on my 1992 Volvo 960?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How do I measure the bolt pattern on my 1992 Volvo?
The 1992 960 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 1992 Volvo 960 use?
The 1992 Volvo 960 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset