1996 Volvo 960 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Volvo 960, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1996 960 — Year-Specific Fitment Context
The 1996 Volvo 960 is in year 5 of 6 using the 5x108 pattern (1992–1997). Wheels from any 1992–1997 Volvo 960 are cross-compatible with the 1996 model.
Volvo 960 Bolt Pattern by Year
The table below shows how the 960's wheel specifications have changed over the years. The 1996 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 1996 Volvo 960
For your 1996 Volvo 960, the bolt pattern is 5x108 with a center bore of 63.4mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibrations. The offset is critical: the stock offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: 14x1.5 thread pitch with a conical (60-degree) or ball seat, matching the wheel's seat type. Improper lug nuts can lead to wheel loosening. Verify that the wheel load rating meets or exceeds the vehicle's requirements. For cross-compatibility, wheels from 1992–1997 Volvo 960 models fit directly.
Historical Fitment Data Reference
In our dataset, Volvo 960 appears from 1992 to 1997 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 63.4mm bore is specific and mismatched bores cause vibration.
- ✅ Check offset carefully: the 1996 960 has tight clearance; offsets lower than 45mm may contact struts, higher than 55mm may rub fenders.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Volvo 960 — Frequently Asked Questions
What is the bolt pattern for a 1996 Volvo 960?
The 1996 Volvo 960 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Volvo 960 have the same bolt pattern as the 1996?
The Volvo 960 uses the 5x108 pattern from 1992 through 1997. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
What lug nut size does the 1996 Volvo 960 use?
The 1996 Volvo 960 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 1996 Volvo 960s use lug bolts or lug nuts?
The 1996 960 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 1996 Volvo 960?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What is the PCD for a 1996 Volvo 960?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1996 960, the PCD is 5x108.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset