2026 Volvo ACL Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Volvo ACL is 5x108. It has a center bore of 63.4 mm, an offset range of 45-55, and utilizes 14x1.5 (Ball seat, 19mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Volvo ACL Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Center Bore (Hub Bore) | 63.4 mm |
| Offset Range (ET) | 45-55 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 ACL — Year-Specific Fitment Context
The 2026 model year is the final year of the Volvo ACL's 5x108 bolt pattern run (since 2024). Wheels from any 2024–2026 Volvo ACL are cross-compatible with the 2026 model.
Volvo ACL Bolt Pattern by Year
Looking for all generations? View the complete Volvo ACL (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the ACL's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Volvo ACL Wheel Interchange & Donor Fitment Guide (5x108)
The 5x108 bolt pattern is shared by 606 vehicles in our database (common). For safe wheel swaps on the 2026 Volvo ACL, donor rims must match the 5x108 PCD and have a center bore of at least 63.4 mm:
DIRECT HUB MATCH Same 5x108 Pattern & Exact 63.4mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2019 Volvo S60 | 63.4 mm (Exact) | 45-50 | 14x1.5 (Cone) |
| 2017 Volvo S90 | 63.4 mm (Exact) | 47,5 | B 14x1.50 (Cone) |
| 2025 Volvo V60 | 63.4 mm (Exact) | 45-55 | 14x1.5 (Ball) |
| 2025 Volvo V60CC | 63.4 mm (Exact) | 45-50 | 14x1.5 (Ball) |
| 2009 Volvo V70 | 63.4 mm (Exact) | 50 | B 14x1.50 (Cone) |
| 2017 Volvo V90 | 63.4 mm (Exact) | 47,5 | B 14x1.50 (Cone) |
HUB RING FITMENT Same 5x108 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2016 Volvo S80 | 65.1 mm | 65.1mm → 63.4mm |
52,5 |
| 1996 Volvo 850 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 1992 Volvo 240 | 65.1 mm | 65.1mm → 63.4mm |
25 |
| 1998 Volvo C70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 1998 Volvo S70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 2003 Volvo XC70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Volvo ACL — Frequently Asked Questions
What is the bolt pattern for a 2026 Volvo ACL?
The 2026 Volvo ACL uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45-55mm.
What other years of Volvo ACL have the same bolt pattern as the 2026?
The Volvo ACL uses the 5x108 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2026 Volvo ACL?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 45-55mm, and a center bore of at least 63.4mm (using hub rings if larger).
What is the PCD for a 2026 Volvo ACL?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 ACL, the PCD is 5x108.
Do 2026 Volvo ACLs use lug bolts or lug nuts?
The 2026 ACL requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2026 Volvo ACL?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →