2000 Volvo S70 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Volvo S70, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.75 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 43 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2000 S70 — Year-Specific Fitment Context
The 2000 model year is the final year of the Volvo S70's 5x108 bolt pattern run (since 1998). Wheels from any 1998–2000 Volvo S70 are cross-compatible with the 2000 model.
Volvo S70 Bolt Pattern by Year
The table below shows how the S70's wheel specifications have changed over the years. The 2000 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2000 Volvo S70
For your 2000 Volvo S70, the 5x108 bolt pattern and 65.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset is sensitive: stick to 43mm ±5mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.75) and seat type—Volvo uses a ball seat, not conical. Mismatched lug nuts can cause wheel loosening. Verify wheel load rating meets or exceeds OEM specs for safety.
Historical Fitment Data Reference
In our dataset, Volvo S70 appears from 1998 to 2000 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid wheels with offset below 38mm; they may rub the strut or fender.
- ✅ Check that aftermarket wheels clear the brake calipers; some 17"+ designs may interfere.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Volvo S70 — Frequently Asked Questions
What is the bolt pattern for a 2000 Volvo S70?
The 2000 Volvo S70 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 43mm.
What other years of Volvo S70 have the same bolt pattern as the 2000?
The Volvo S70 uses the 5x108 pattern from 1998 through 2000. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2000 Volvo S70?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 43mm, and a center bore of at least 65.1mm (using hub rings if larger).
What is the PCD for a 2000 Volvo S70?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 S70, the PCD is 5x108.
How tight should I torque the lug nuts on a 2000 Volvo S70?
Refer to your owner's manual for exact specs, but always tighten the B 12x1.75 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2000 Volvo S70?
The factory center bore (hub bore) for the 2000 Volvo S70 is 65.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset