1999 Volvo S70 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Volvo S70, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.75 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 43 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1999 S70 — Year-Specific Fitment Context
The 1999 Volvo S70 is in year 2 of 3 using the 5x108 pattern (1998–2000). Wheels from any 1998–2000 Volvo S70 are cross-compatible with the 1999 model.
Volvo S70 Bolt Pattern by Year
The table below shows how the S70's wheel specifications have changed over the years. The 1999 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 1999 Volvo S70
For your 1999 Volvo S70, the 5x108 bolt pattern and 65.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 43mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.75) and seat type—factory wheels use ball seats, while aftermarket wheels typically require conical (60-degree) seats. Mixing seat types can lead to loose wheels and catastrophic failure. Verify lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, Volvo S70 appears from 1998 to 2000 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel settling.
- ✅ When using aftermarket wheels, ensure hub-centric rings are installed to match the 65.1mm center bore.
- ✅ Avoid using wheels from non-1998-2000 Volvo S70 models, as bolt pattern or offset may differ.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Volvo S70 — Frequently Asked Questions
What is the bolt pattern for a 1999 Volvo S70?
The 1999 Volvo S70 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 43mm.
What other years of Volvo S70 have the same bolt pattern as the 1999?
The Volvo S70 uses the 5x108 pattern from 1998 through 2000. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Can I use spacers on my 1999 Volvo S70?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 65.1mm center bore. Also verify that you have enough thread engagement for your B 12x1.75 hardware.
How do I measure the bolt pattern on my 1999 Volvo?
The 1999 S70 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Volvo fit my 1999 S70?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 65.1mm.
Why is matching the 65.1mm center bore important for the 1999 S70?
The 65.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset