2001 Acura Integra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Acura Integra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Integra — Year-Specific Fitment Context
The 2001 model year is the final year of the Acura Integra's 4x100 bolt pattern run (since 1992). Wheels from any 1992–2001 Acura Integra are cross-compatible with the 2001 model. Across its full production run (1992–2024), the Integra has also used: 5x114.3.
Acura Integra Bolt Pattern by Year
The table below shows how the Integra's wheel specifications have changed over the years. The 2001 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 474 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2001 Acura Integra
For your 2001 Acura Integra, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use 12x1.5 lug nuts with the correct seat (cone or ball) matching the wheel. Improper seating can lead to wheel loss. Verify thread engagement and torque to spec. Safety first: re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Acura Integra appears from 1992 to 2024 (12 model years). Across model years, this model appears with 2 bolt patterns (4x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ Use hub-centric rings (64.1mm ID to aftermarket bore) to avoid vibrations.
- ✅ Check inner clearance for offset changes: +40mm may clear, but +35mm risks rubbing on strut.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2001 Acura Integra — Frequently Asked Questions
What is the bolt pattern for a 2001 Acura Integra?
The 2001 Acura Integra uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 45mm.
What other years of Acura Integra have the same bolt pattern as the 2001?
The Acura Integra uses the 4x100 pattern from 1992 through 2001. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Will wheels from another Acura fit my 2001 Integra?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.1mm.
What lug nut size does the 2001 Acura Integra use?
The 2001 Acura Integra uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2001 Acura?
The 2001 Integra uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2001 Acura Integras use lug bolts or lug nuts?
The 2001 Integra requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset