2024 Acura Integra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Acura Integra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2024 Integra — Year-Specific Fitment Context
The 2024 model year is the final year of the Acura Integra's 5x114.3 bolt pattern run (since 1992). Wheels from any 1992–2024 Acura Integra are cross-compatible with the 2024 model.
Acura Integra Bolt Pattern by Year
The table below shows how the Integra's wheel specifications have changed over the years. The 2024 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2024 Acura Integra
For the 2024 Acura Integra, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify spoke clearance with brake calipers. Lug nuts are 12x1.5 thread pitch with a conical (60-degree) seat. Using incorrect seat type (e.g., ball seat) can lead to wheel loosening. Re-torque after 50-100 miles. Note: 1992-2024 Integra wheels are cross-compatible, but verify offset and bore for your specific setup.
Historical Fitment Data Reference
In our dataset, Acura Integra appears from 1992 to 2024 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings (64.1mm ID to wheel's bore OD).
- ✅ Avoid spacers unless necessary; if used, ensure extended thread engagement and hub-centric design.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Acura Integra — Frequently Asked Questions
What is the bolt pattern for a 2024 Acura Integra?
The 2024 Acura Integra uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura Integra have the same bolt pattern as the 2024?
The Acura Integra uses the 5x114.3 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
Will wheels from another Acura fit my 2024 Integra?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
What lug nut size does the 2024 Acura Integra use?
The 2024 Acura Integra uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2024 Acura Integra?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the factory wheel offset for a 2024 Acura Integra?
The OEM offset for the 2024 Integra is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset