1995 Acura Integra Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Acura Integra, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1995 Integra — Year-Specific Fitment Context
The 1995 Acura Integra is in year 4 of 33 using the 5x114.3 pattern (1992–2024). Wheels from any 1992–2024 Acura Integra are cross-compatible with the 1995 model.
Acura Integra Bolt Pattern by Year
The table below shows how the Integra's wheel specifications have changed over the years. The 1995 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1995 Acura Integra
For your 1995 Acura Integra, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset should stay near 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use conical (60-degree) seats, while aftermarket may require ball or tapered seats. Mismatched lug nuts can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Acura Integra appears from 1992 to 2024 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles, then periodically check.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 64.1mm; outer diameter must match wheel bore.
- ✅ Avoid spacers unless necessary; if used, ensure extended studs and proper offset to maintain scrub radius.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Acura Integra — Frequently Asked Questions
What is the bolt pattern for a 1995 Acura Integra?
The 1995 Acura Integra uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura Integra have the same bolt pattern as the 1995?
The Acura Integra uses the 5x114.3 pattern from 1992 through 2024. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
Why is matching the 64.1mm center bore important for the 1995 Integra?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 1995 Acura?
The 1995 Integra uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 1995 Acura Integra?
The factory center bore (hub bore) for the 1995 Acura Integra is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 1995 Acura Integra?
The OEM offset for the 1995 Integra is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset