1998 Acura SLX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Acura SLX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1998 SLX — Year-Specific Fitment Context
The 1998 Acura SLX is in year 3 of 4 using the 5x114.3 pattern (1996–1999). Wheels from any 1996–1999 Acura SLX are cross-compatible with the 1998 model.
Acura SLX Bolt Pattern by Year
The table below shows how the SLX's wheel specifications have changed over the years. The 1998 model year is highlighted.
Fitment Notes
The 1998 Acura SLX has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Acura SLX appears from 1996 to 1999 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
1998 Acura SLX — Frequently Asked Questions
What is the bolt pattern for a 1998 Acura SLX?
The 1998 Acura SLX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura SLX have the same bolt pattern as the 1998?
The Acura SLX uses the 5x114.3 pattern from 1996 through 1999. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
What is the PCD for a 1998 Acura SLX?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1998 SLX, the PCD is 5x114.3.
Why is matching the 64.1mm center bore important for the 1998 SLX?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 1998 Acura SLX?
The OEM offset for the 1998 SLX is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 1998 Acura?
The 1998 SLX uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Acura SLX is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1996-1999 (4 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1998 Acura SLX, please report it via our About page contact so we can verify and update this record.