1999 Acura SLX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Acura SLX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1999 SLX — Year-Specific Fitment Context
The 1999 model year is the final year of the Acura SLX's 5x114.3 bolt pattern run (since 1996). Wheels from any 1996–1999 Acura SLX are cross-compatible with the 1999 model.
Acura SLX Bolt Pattern by Year
The table below shows how the SLX's wheel specifications have changed over the years. The 1999 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1999 Acura SLX
For your 1999 Acura SLX, the bolt pattern is 5x114.3 with a center bore of 64.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The offset is critical; the factory offset is 45mm, and deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) or ball seat to match the wheel. Improper seating can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or install rings, and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Acura SLX appears from 1996 to 1999 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 64.1mm bore is specific and mismatched bores cause vibration.
- ✅ Check offset carefully: +45mm is standard; going lower (e.g., +35mm) may require fender rolling or spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Acura SLX — Frequently Asked Questions
What is the bolt pattern for a 1999 Acura SLX?
The 1999 Acura SLX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura SLX have the same bolt pattern as the 1999?
The Acura SLX uses the 5x114.3 pattern from 1996 through 1999. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Why is matching the 64.1mm center bore important for the 1999 SLX?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 1999 Acura SLX?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 1999 Acura?
The 1999 SLX uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 1999 Acura SLX?
The OEM offset for the 1999 SLX is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset