2009 Bentley Arnage Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Bentley Arnage, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 55 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2009 Arnage — Year-Specific Fitment Context
The 2009 model year is the final year of the Bentley Arnage's 5x120 bolt pattern run (since 2005). Wheels from any 2005–2009 Bentley Arnage are cross-compatible with the 2009 model.
Bentley Arnage Bolt Pattern by Year
The table below shows how the Arnage's wheel specifications have changed over the years. The 2009 model year is highlighted.
Fitment Notes
The 2009 Bentley Arnage has a bolt pattern of 5x120.
This means it is a 5 lug pattern with a circle diameter of 120mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Bentley Arnage appears from 2005 to 2009 (5 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
2009 Bentley Arnage — Frequently Asked Questions
What is the bolt pattern for a 2009 Bentley Arnage?
The 2009 Bentley Arnage uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 55mm.
What other years of Bentley Arnage have the same bolt pattern as the 2009?
The Bentley Arnage uses the 5x120 pattern from 2005 through 2009. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2009 Bentley Arnage?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2009 Bentley Arnage?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2009 Arnage, the PCD is 5x120.
Will wheels from another Bentley fit my 2009 Arnage?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 72.6mm.
What is the factory wheel offset for a 2009 Bentley Arnage?
The OEM offset for the 2009 Arnage is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Bentley Arnage is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2005-2009 (5 model years).
- Observed bolt-pattern variants: 1 (5x120).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2009 Bentley Arnage, please report it via our About page contact so we can verify and update this record.