2006 Bentley Arnage Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Bentley Arnage, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 55 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2006 Arnage — Year-Specific Fitment Context
The 2006 Bentley Arnage is in year 2 of 5 using the 5x120 pattern (2005–2009). Wheels from any 2005–2009 Bentley Arnage are cross-compatible with the 2006 model.
Bentley Arnage Bolt Pattern by Year
The table below shows how the Arnage's wheel specifications have changed over the years. The 2006 model year is highlighted.
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2006 Bentley Arnage
The 2006 Bentley Arnage uses a 5x120 bolt pattern with a 72.6mm center bore. Aftermarket wheels must have a bore ≥72.6mm; use hub-centric rings to prevent vibration. Offset is critical: stock is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type—Bentley uses ball seats; using incorrect seats can lead to wheel loss. For 2005–2009 Arnage models, wheels are cross-compatible, but double-check offset and bore.
Historical Fitment Data Reference
In our dataset, Bentley Arnage appears from 2005 to 2009 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 50mm on the front; they may contact the brake caliper.
- ✅ When using aftermarket wheels, always install hub-centric rings to match the 72.6mm bore exactly.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Bentley Arnage — Frequently Asked Questions
What is the bolt pattern for a 2006 Bentley Arnage?
The 2006 Bentley Arnage uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 55mm.
What other years of Bentley Arnage have the same bolt pattern as the 2006?
The Bentley Arnage uses the 5x120 pattern from 2005 through 2009. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What is the factory wheel offset for a 2006 Bentley Arnage?
The OEM offset for the 2006 Arnage is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Bentley fit my 2006 Arnage?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 72.6mm.
Can I use spacers on my 2006 Bentley Arnage?
Yes, but ensure the wheel spacers match the 5x120 bolt pattern and 72.6mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
Can I put aftermarket wheels on my 2006 Bentley Arnage?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 55mm, and a center bore of at least 72.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset