2010 BMW 6 Series Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 BMW 6 Series, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | B 12x1.50 |
| Center Bore (CB) | 72.6 mm |
| Offset (ET) | 17 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2010 6 Series — Year-Specific Fitment Context
The 2010 BMW 6 Series is in year 7 of 15 using the 5x120 pattern (2004–2018). Wheels from any 2004–2018 BMW 6 Series are cross-compatible with the 2010 model. Across its full production run (2004–2019), the 6 Series has also used: 5x112.
BMW 6 Series Bolt Pattern by Year
The table below shows how the 6 Series's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 5x120 | 72.6 | 17 |
| 2005 | 5x120 | 72.6 | 17 |
| 2006 | 5x120 | 72.6 | 17 |
| 2007 | 5x120 | 72.6 | 17 |
| 2008 | 5x120 | 72.6 | 17 |
| 2009 | 5x120 | 72.6 | 17 |
| ▸ 2010 | 5x120 | 72.6 | 17 |
| 2012 | 5x120 | 72.6 | 32 |
| 2013 | 5x120 | 72.6 | 32 |
| 2014 | 5x120 | 72.6 | 32 |
| 2015 | 5x120 | 72.6 | 32 |
| 2016 | 5x120 | 72.6 | 32 |
| 2017 | 5x120 | 72.6 | 32 |
| 2018 | 5x120 | 72.56 | 30-40 |
| 2019 | 5x112 | 66.6 | 25-40 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2010 BMW 6 Series
For the 2010 BMW 6 Series, the 72.6mm center bore is critical for proper wheel centering. Aftermarket wheels with a larger bore require hub-centric rings to prevent vibrations and ensure load is carried by the hub, not the lug nuts. The 17mm offset range is sensitive; deviations can cause rubbing or clearance issues with suspension and brakes. Always verify offset and test fit if possible. Lug nuts are M12x1.5 with a ball seat (R14). Using incorrect thread pitch or seat type (e.g., cone seat) can lead to loose wheels or stud damage. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, BMW 6 Series appears from 2004 to 2019 (15 model years). Across model years, this model appears with 2 bolt patterns (5x112, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 72.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100-110 Nm after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations and safety risks are common.
- ✅ Check inner clearance for brake calipers, especially with aftermarket wheels; 17mm offset is a baseline.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 BMW 6 Series — Frequently Asked Questions
What is the bolt pattern for a 2010 BMW 6 Series?
The 2010 BMW 6 Series uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 72.6mm and the offset is 17mm.
What other years of BMW 6 Series have the same bolt pattern as the 2010?
The BMW 6 Series uses the 5x120 pattern from 2004 through 2018. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Do 2010 BMW 6 Seriess use lug bolts or lug nuts?
The 2010 6 Series requires B 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2010 BMW?
The 2010 6 Series uses a 5x120 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2010 BMW 6 Series?
Refer to your owner's manual for exact specs, but always tighten the B 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2010 BMW 6 Series?
The OEM offset for the 2010 6 Series is typically around 17mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset