2004 Cadillac Seville Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Cadillac Seville, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2004 Seville — Year-Specific Fitment Context
The 2004 model year is the final year of the Cadillac Seville's 5x115 bolt pattern run (since 1992). Wheels from any 1992–2004 Cadillac Seville are cross-compatible with the 2004 model.
Cadillac Seville Bolt Pattern by Year
The table below shows how the Seville's wheel specifications have changed over the years. The 2004 model year is highlighted.
Fitment Notes
The 2004 Cadillac Seville has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Cadillac Seville appears from 1992 to 2004 (13 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2004 Cadillac Seville — Frequently Asked Questions
What is the bolt pattern for a 2004 Cadillac Seville?
The 2004 Cadillac Seville uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 42mm.
What other years of Cadillac Seville have the same bolt pattern as the 2004?
The Cadillac Seville uses the 5x115 pattern from 1992 through 2004. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2004 Cadillac Seville?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2004 Cadillac Sevilles use lug bolts or lug nuts?
The 2004 Seville requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2004 Cadillac Seville?
The factory center bore (hub bore) for the 2004 Cadillac Seville is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2004 Cadillac Seville?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 42mm, and a center bore of at least 70.3mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Cadillac Seville is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-2004 (13 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2004 Cadillac Seville, please report it via our About page contact so we can verify and update this record.