2014 Chevrolet Cruze Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Chevrolet Cruze, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x105 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.6 mm |
| Offset (ET) | 39 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 Cruze — Year-Specific Fitment Context
The 2014 Chevrolet Cruze is in year 4 of 9 using the 5x105 pattern (2011–2019). Wheels from any 2011–2019 Chevrolet Cruze are cross-compatible with the 2014 model.
Chevrolet Cruze Bolt Pattern by Year
The table below shows how the Cruze's wheel specifications have changed over the years. The 2014 model year is highlighted.
Fitment Notes
The 2014 Chevrolet Cruze has a bolt pattern of 5x105.
This means it is a 5 lug pattern with a circle diameter of 105mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Chevrolet Cruze appears from 2011 to 2019 (9 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 1.0 mm
5x105 Pattern Context
This bolt pattern appears on 50 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x105:
2014 Chevrolet Cruze — Frequently Asked Questions
What is the bolt pattern for a 2014 Chevrolet Cruze?
The 2014 Chevrolet Cruze uses a 5x105 bolt pattern (also called lug pattern or PCD). The center bore is 56.6mm and the offset is 39mm.
What other years of Chevrolet Cruze have the same bolt pattern as the 2014?
The Chevrolet Cruze uses the 5x105 pattern from 2011 through 2019. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Why is matching the 56.6mm center bore important for the 2014 Cruze?
The 56.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2014 Chevrolet Cruze?
The OEM offset for the 2014 Cruze is typically around 39mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2014 Chevrolet Cruze?
Yes, but ensure the wheel spacers match the 5x105 bolt pattern and 56.6mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How tight should I torque the lug nuts on a 2014 Chevrolet Cruze?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Editorial Fitment Notes
Chevrolet Cruze is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2011-2019 (9 model years).
- Observed bolt-pattern variants: 1 (5x105).
- Observed total offset span across years: 1.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2014 Chevrolet Cruze, please report it via our About page contact so we can verify and update this record.