2014 Chevrolet Impala Limited Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Chevrolet Impala Limited, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2014 Impala Limited — Year-Specific Fitment Context
The 2014 model year marks the beginning of the Chevrolet Impala Limited's 5x115 bolt pattern era, which continued through 2016 (3 consecutive years). Wheels from any 2014–2016 Chevrolet Impala Limited are cross-compatible with the 2014 model.
Chevrolet Impala Limited Bolt Pattern by Year
The table below shows how the Impala Limited's wheel specifications have changed over the years. The 2014 model year is highlighted.
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2014 Chevrolet Impala Limited
For the 2014 Chevrolet Impala Limited, the 5x115 bolt pattern and 70.3mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.5 thread pitch and proper seat type (conical or ball seat) to avoid wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset compatibility before installation.
Historical Fitment Data Reference
In our dataset, Chevrolet Impala Limited appears from 2014 to 2016 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on wheel studs.
- ✅ Check that aftermarket wheels clear the brake calipers and suspension components, especially with lower offsets.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Chevrolet Impala Limited — Frequently Asked Questions
What is the bolt pattern for a 2014 Chevrolet Impala Limited?
The 2014 Chevrolet Impala Limited uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 50mm.
What other years of Chevrolet Impala Limited have the same bolt pattern as the 2014?
The Chevrolet Impala Limited uses the 5x115 pattern from 2014 through 2016. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Why is matching the 70.3mm center bore important for the 2014 Impala Limited?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2014 Chevrolet Impala Limited?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2014 Chevrolet Impala Limited?
The factory center bore (hub bore) for the 2014 Chevrolet Impala Limited is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2014 Chevrolet Impala Limited?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 Impala Limited, the PCD is 5x115.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset