2007 Chevrolet Monte Carlo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Chevrolet Monte Carlo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Monte Carlo — Year-Specific Fitment Context
The 2007 model year is the final year of the Chevrolet Monte Carlo's 5x115 bolt pattern run (since 1995). Wheels from any 1995–2007 Chevrolet Monte Carlo are cross-compatible with the 2007 model.
Chevrolet Monte Carlo Bolt Pattern by Year
The table below shows how the Monte Carlo's wheel specifications have changed over the years. The 2007 model year is highlighted.
Fitment Notes
The 2007 Chevrolet Monte Carlo has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Chevrolet Monte Carlo appears from 1995 to 2007 (13 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2007 Chevrolet Monte Carlo — Frequently Asked Questions
What is the bolt pattern for a 2007 Chevrolet Monte Carlo?
The 2007 Chevrolet Monte Carlo uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 40mm.
What other years of Chevrolet Monte Carlo have the same bolt pattern as the 2007?
The Chevrolet Monte Carlo uses the 5x115 pattern from 1995 through 2007. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I use spacers on my 2007 Chevrolet Monte Carlo?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Do 2007 Chevrolet Monte Carlos use lug bolts or lug nuts?
The 2007 Monte Carlo requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2007 Chevrolet Monte Carlo?
The factory center bore (hub bore) for the 2007 Chevrolet Monte Carlo is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2007 Chevrolet Monte Carlo?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Chevrolet Monte Carlo is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1995-2007 (13 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Chevrolet Monte Carlo, please report it via our About page contact so we can verify and update this record.