2000 Chevrolet S10 Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Chevrolet S10 Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 0-13 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2000 S10 Extended Cab — Year-Specific Fitment Context
The 2000 Chevrolet S10 Extended Cab is in year 9 of 12 using the 5x120.65 pattern (1992–2003). Wheels from any 1992–2003 Chevrolet S10 Extended Cab are cross-compatible with the 2000 model.
Chevrolet S10 Extended Cab Bolt Pattern by Year
The table below shows how the S10 Extended Cab's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 0-13 |
| 1993 | 5x120.65 | 70.3 | 0-13 |
| 1994 | 5x120.65 | 70.3 | 0-13 |
| 1995 | 5x120.65 | 70.3 | 0-13 |
| 1996 | 5x120.65 | 70.3 | 0-13 |
| 1997 | 5x120.65 | 70.3 | 0-13 |
| 1998 | 5x120.65 | 70.3 | 0-13 |
| 1999 | 5x120.65 | 70.3 | 0-13 |
| ▸ 2000 | 5x120.65 | 70.3 | 0-13 |
| 2001 | 5x120.65 | 70.3 | 0-13 |
| 2002 | 5x120.65 | 70.3 | 0-13 |
| 2003 | 5x120.65 | 70.3 | 0-13 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2000 Chevrolet S10 Extended Cab
For your 2000 Chevrolet S10 Extended Cab, the bolt pattern is 5x120.65mm with a 70.3mm center bore. When selecting aftermarket wheels, ensure hub-centric rings are used to match the 70.3mm bore, preventing vibration and ensuring proper load distribution. The offset range is 0-13mm; staying within this range maintains suspension geometry and avoids rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper) to guarantee safe clamping force. Mismatched lug nuts can lead to wheel loosening. Verify that aftermarket wheels are compatible with your vehicle's hub diameter and offset to avoid safety hazards.
Historical Fitment Data Reference
In our dataset, Chevrolet S10 Extended Cab appears from 1992 to 2003 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 13.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on studs.
- ✅ Check that aftermarket wheels clear the brake calipers and suspension components, especially with lower offsets.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Chevrolet S10 Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2000 Chevrolet S10 Extended Cab?
The 2000 Chevrolet S10 Extended Cab uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 0-13mm.
What other years of Chevrolet S10 Extended Cab have the same bolt pattern as the 2000?
The Chevrolet S10 Extended Cab uses the 5x120.65 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2000 Chevrolet S10 Extended Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2000 Chevrolet S10 Extended Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2000 S10 Extended Cab, the PCD is 5x120.65.
Can I put aftermarket wheels on my 2000 Chevrolet S10 Extended Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x120.65 bolt pattern, an offset near 0-13mm, and a center bore of at least 70.3mm (using hub rings if larger).
What lug nut size does the 2000 Chevrolet S10 Extended Cab use?
The 2000 Chevrolet S10 Extended Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset