2002 Chevrolet S10 Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Chevrolet S10 Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 0-13 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2002 S10 Extended Cab — Year-Specific Fitment Context
The 2002 Chevrolet S10 Extended Cab is in year 11 of 12 using the 5x120.65 pattern (1992–2003). Wheels from any 1992–2003 Chevrolet S10 Extended Cab are cross-compatible with the 2002 model.
Chevrolet S10 Extended Cab Bolt Pattern by Year
The table below shows how the S10 Extended Cab's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 0-13 |
| 1993 | 5x120.65 | 70.3 | 0-13 |
| 1994 | 5x120.65 | 70.3 | 0-13 |
| 1995 | 5x120.65 | 70.3 | 0-13 |
| 1996 | 5x120.65 | 70.3 | 0-13 |
| 1997 | 5x120.65 | 70.3 | 0-13 |
| 1998 | 5x120.65 | 70.3 | 0-13 |
| 1999 | 5x120.65 | 70.3 | 0-13 |
| 2000 | 5x120.65 | 70.3 | 0-13 |
| 2001 | 5x120.65 | 70.3 | 0-13 |
| ▸ 2002 | 5x120.65 | 70.3 | 0-13 |
| 2003 | 5x120.65 | 70.3 | 0-13 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2002 Chevrolet S10 Extended Cab
For your 2002 Chevrolet S10 Extended Cab, the 5x120.65mm bolt pattern and 70.3mm center bore are critical. Aftermarket wheels often have a larger center bore; use hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 0-13mm; deviations can cause rubbing or bearing stress. Always use 12x1.5 lug nuts with the correct seat—factory wheels use a conical (60-degree) seat. Never mix seat types; improper seating can lead to wheel loss. Verify lug nut torque to 140 Nm (103 lb-ft) and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Chevrolet S10 Extended Cab appears from 1992 to 2003 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 13.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to account for settling.
- ✅ Avoid wheels with offset beyond 13mm; they may contact suspension or fenders.
- ✅ Check that aftermarket wheels have a center bore ≥70.3mm and use hub rings if larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Chevrolet S10 Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2002 Chevrolet S10 Extended Cab?
The 2002 Chevrolet S10 Extended Cab uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 0-13mm.
What other years of Chevrolet S10 Extended Cab have the same bolt pattern as the 2002?
The Chevrolet S10 Extended Cab uses the 5x120.65 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What lug nut size does the 2002 Chevrolet S10 Extended Cab use?
The 2002 Chevrolet S10 Extended Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2002 Chevrolet S10 Extended Cab?
The OEM offset for the 2002 S10 Extended Cab is typically around 0-13mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2002 Chevrolet S10 Extended Cab?
The factory center bore (hub bore) for the 2002 Chevrolet S10 Extended Cab is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 70.3mm center bore important for the 2002 S10 Extended Cab?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset