1993 Chevrolet S10 Extended Cab Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 1993 Chevrolet S10 Extended Cab is 5x120.65 (5x4.75"). It has a center bore of 70.3 mm, an offset range of 0-13, and utilizes 12x1.5 (Cone seat, 19mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
1993 Chevrolet S10 Extended Cab Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Center Bore (Hub Bore) | 70.3 mm |
| Offset Range (ET) | 0-13 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
1993 S10 Extended Cab — Year-Specific Fitment Context
The 1993 Chevrolet S10 Extended Cab is in year 2 of 12 using the 5x120.65 pattern (1992–2003). Wheels from any 1992–2003 Chevrolet S10 Extended Cab are cross-compatible with the 1993 model.
Chevrolet S10 Extended Cab Bolt Pattern by Year
The table below shows how the S10 Extended Cab's wheel specifications have changed over the years. The 1993 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 0-13 |
| ▸ 1993 | 5x120.65 | 70.3 | 0-13 |
| 1994 | 5x120.65 | 70.3 | 0-13 |
| 1995 | 5x120.65 | 70.3 | 0-13 |
| 1996 | 5x120.65 | 70.3 | 0-13 |
| 1997 | 5x120.65 | 70.3 | 0-13 |
| 1998 | 5x120.65 | 70.3 | 0-13 |
| 1999 | 5x120.65 | 70.3 | 0-13 |
| 2000 | 5x120.65 | 70.3 | 0-13 |
| 2001 | 5x120.65 | 70.3 | 0-13 |
| 2002 | 5x120.65 | 70.3 | 0-13 |
| 2003 | 5x120.65 | 70.3 | 0-13 |
1993 Chevrolet S10 Extended Cab Wheel Interchange & Donor Fitment Guide (5x120.65)
The 5x120.65 bolt pattern is shared by 202 vehicles in our database (moderately common). For safe wheel swaps on the 1993 Chevrolet S10 Extended Cab, donor rims must match the 5x120.65 PCD and have a center bore of at least 70.3 mm:
DIRECT HUB MATCH Same 5x120.65 Pattern & Exact 70.3mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 1996 Chevrolet S10 Regular Cab | 70.3 mm (Exact) | 0-13 | 12x1.5 (Cone) |
| 1992 GMC Jimmy | 70.3 mm (Exact) | 50 | 12x1.5 (Cone) |
| 1992 GMC Sonoma Club Cab | 70.3 mm (Exact) | 0-13 | 12x1.5 (Cone) |
| 1993 GMC Sonoma Club Coupe Cab | 70.3 mm (Exact) | 0-13 | 12x1.5 (Cone) |
| 2001 GMC Sonoma Crew Cab | 70.3 mm (Exact) | 0-13 | 12x1.5 (Cone) |
| 1999 GMC Sonoma Extended Cab | 70.3 mm (Exact) | 0-13 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x120.65 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 Jaguar I-PACE | 73.8 mm | 73.8mm → 70.3mm |
33 |
| 1992 Jaguar XJ | 73.8 mm | 73.8mm → 70.3mm |
33 |
| 1997 Jaguar XK | 73.8 mm | 73.8mm → 70.3mm |
33 |
Expert Buying Guide for 1993 Chevrolet S10 Extended Cab
For your 1993 Chevrolet S10 Extended Cab, the bolt pattern is 5x120.65mm with a center bore of 70.3mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset range is 0-13mm; staying within this range maintains suspension geometry and prevents tire rubbing. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper). Avoid ball-seat lug nuts as they can loosen. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Chevrolet S10 Extended Cab appears from 1992 to 2003 (12 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 13.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 70.3mm to avoid vibrations.
- ✅ Stick to offset between 0-13mm; offsets outside this range can cause rubbing or poor handling.
- ✅ Re-torque lug nuts to 90-100 ft-lbs after 50-100 miles, and check periodically for loosening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
1993 Chevrolet S10 Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 1993 Chevrolet S10 Extended Cab?
The 1993 Chevrolet S10 Extended Cab uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 0-13mm.
What other years of Chevrolet S10 Extended Cab have the same bolt pattern as the 1993?
The Chevrolet S10 Extended Cab uses the 5x120.65 pattern from 1992 through 2003. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1993 Chevrolet?
The 1993 S10 Extended Cab uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 1993 Chevrolet S10 Extended Cab use?
The 1993 Chevrolet S10 Extended Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Chevrolet fit my 1993 S10 Extended Cab?
Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
What is the PCD for a 1993 Chevrolet S10 Extended Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 S10 Extended Cab, the PCD is 5x120.65.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →