2010 Chevrolet Silverado 2500 HD Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Chevrolet Silverado 2500 HD Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 116.6 mm |
| Offset (ET) | 26 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2010 Silverado 2500 HD Extended Cab — Year-Specific Fitment Context
The 2010 Chevrolet Silverado 2500 HD Extended Cab is in year 12 of 13 using the 8x165.1 pattern (1999–2011). Wheels from any 1999–2011 Chevrolet Silverado 2500 HD Extended Cab are cross-compatible with the 2010 model. Across its full production run (1999–2013), the Silverado 2500 HD Extended Cab has also used: 8x180.
Chevrolet Silverado 2500 HD Extended Cab Bolt Pattern by Year
The table below shows how the Silverado 2500 HD Extended Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 8x165.1 | 116.6 | 26 |
| 2000 | 8x165.1 | 116.6 | 26 |
| 2001 | 8x165.1 | 116.6 | 26 |
| 2002 | 8x165.1 | 116.6 | 26 |
| 2003 | 8x165.1 | 116.6 | 26 |
| 2004 | 8x165.1 | 116.6 | 26 |
| 2005 | 8x165.1 | 116.6 | 26 |
| 2006 | 8x165.1 | 116.6 | 26 |
| 2007 | 8x165.1 | 116.6 | 26 |
| 2008 | 8x165.1 | 116.6 | 26 |
| 2009 | 8x165.1 | 116.6 | 26 |
| ▸ 2010 | 8x165.1 | 116.6 | 26 |
| 2011 | 8x165.1 | 116.6 | 26 |
| 2012 | 8x180 | 124.1 | 42 |
| 2013 | 8x180 | 124.1 | 42 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2010 Chevrolet Silverado 2500 HD Extended Cab
The 2010 Chevrolet Silverado 2500 HD Extended Cab uses an 8x165.1 bolt pattern with a critical center bore of 116.6mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset sensitivity is high; the factory 26mm offset maintains correct scrub radius and suspension geometry. Deviating more than ±10mm may cause rubbing or bearing stress. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (cone seat). Ball-seat or shank-style nuts can loosen or damage the wheel. Re-torque after 50-100 miles. Wheels from 1999-2011 Silverado 2500 HD models are direct fit.
Historical Fitment Data Reference
In our dataset, Chevrolet Silverado 2500 HD Extended Cab appears from 1999 to 2013 (15 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 16.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using wheels with a center bore larger than 116.6mm without hub-centric rings.
- ✅ Check for caliper clearance when using wheels with offset below 16mm or above 36mm.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Chevrolet Silverado 2500 HD Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 Chevrolet Silverado 2500 HD Extended Cab?
The 2010 Chevrolet Silverado 2500 HD Extended Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.6mm and the offset is 26mm.
What other years of Chevrolet Silverado 2500 HD Extended Cab have the same bolt pattern as the 2010?
The Chevrolet Silverado 2500 HD Extended Cab uses the 8x165.1 pattern from 1999 through 2011. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the factory wheel offset for a 2010 Chevrolet Silverado 2500 HD Extended Cab?
The OEM offset for the 2010 Silverado 2500 HD Extended Cab is typically around 26mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Chevrolet fit my 2010 Silverado 2500 HD Extended Cab?
Only if they share the exact same 8x165.1 bolt pattern, a compatible offset, and a center bore equal to or larger than 116.6mm.
How tight should I torque the lug nuts on a 2010 Chevrolet Silverado 2500 HD Extended Cab?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 26mm offset mean for the 2010 Silverado 2500 HD Extended Cab?
An offset of 26mm means the wheel's mounting surface is 26mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset