2011 Chevrolet Silverado 3500 HD Regular Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Chevrolet Silverado 3500 HD Regular Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 116.6 mm |
| Offset (ET) | 12 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2011 Silverado 3500 HD Regular Cab — Year-Specific Fitment Context
The 2011 model year is the final year of the Chevrolet Silverado 3500 HD Regular Cab's 8x165.1 bolt pattern run (since 2007). Wheels from any 2007–2011 Chevrolet Silverado 3500 HD Regular Cab are cross-compatible with the 2011 model. Important: starting in 2012, Chevrolet switched to 8x180 — those wheels will not fit the 2011 model. Across its full production run (2007–2024), the Silverado 3500 HD Regular Cab has also used: 8x180.
Chevrolet Silverado 3500 HD Regular Cab Bolt Pattern by Year
The table below shows how the Silverado 3500 HD Regular Cab's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 8x165.1 | 116.6 | 12 |
| 2008 | 8x165.1 | 116.6 | 12 |
| 2009 | 8x165.1 | 116.6 | 12 |
| 2010 | 8x165.1 | 116.6 | 12 |
| ▸ 2011 | 8x165.1 | 116.6 | 12 |
| 2012 | 8x180 | 124.1 | 42 |
| 2013 | 8x180 | 124.1 | 42 |
| 2014 | 8x180 | 124.1 | 42 |
| 2015 | 8x180 | 124.1 | 42 |
| 2016 | 8x180 | 124.1 | 42 |
| 2017 | 8x180 | 124.1 | 42 |
| 2018 | 8x180 | 124.1 | 42 |
| 2021 | 8x180 | 124.9 | 44 |
| 2022 | 8x180 | 124.9 | 44 |
| 2023 | 8x180 | 124.9 | 44 |
| 2024 | 8x180 | 124.9 | 44 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2011 Chevrolet Silverado 3500 HD Regular Cab
For your 2011 Chevrolet Silverado 3500 HD Regular Cab, the bolt pattern is 8x165.1mm, which was used from 2007-2011. After 2011, GM switched to 8x180mm, so ensure any wheels you purchase are specifically for the 8x165.1 pattern. The center bore is 116.6mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is critical: the factory offset is 12mm, and staying within ±6mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (conical/ball seat) to guarantee safe clamping force. Never reuse old lug nuts; replace with new ones specified for your vehicle.
Historical Fitment Data Reference
In our dataset, Chevrolet Silverado 3500 HD Regular Cab appears from 2007 to 2024 (16 model years). Across model years, this model appears with 2 bolt patterns (8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 32.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating and prevent loosening.
- ✅ When installing aftermarket wheels, verify that the wheel's hub bore is at least 116.6mm; use hub-centric rings if larger.
- ✅ Avoid wheels with offset outside 6-18mm range to prevent tire rubbing on suspension or body components.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Chevrolet Silverado 3500 HD Regular Cab — Frequently Asked Questions
What is the bolt pattern for a 2011 Chevrolet Silverado 3500 HD Regular Cab?
The 2011 Chevrolet Silverado 3500 HD Regular Cab uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.6mm and the offset is 12mm.
What other years of Chevrolet Silverado 3500 HD Regular Cab have the same bolt pattern as the 2011?
The Chevrolet Silverado 3500 HD Regular Cab uses the 8x165.1 pattern from 2007 through 2011. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Will 2012 Chevrolet Silverado 3500 HD Regular Cab wheels fit a 2011 model?
No. The 2012 Chevrolet Silverado 3500 HD Regular Cab switched to a 8x180 bolt pattern, which is not compatible with the 2011 model's 8x165.1. Using mismatched patterns is unsafe.
What lug nut size does the 2011 Chevrolet Silverado 3500 HD Regular Cab use?
The 2011 Chevrolet Silverado 3500 HD Regular Cab uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 116.6mm center bore important for the 2011 Silverado 3500 HD Regular Cab?
The 116.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2011 Chevrolet Silverado 3500 HD Regular Cab?
The factory center bore (hub bore) for the 2011 Chevrolet Silverado 3500 HD Regular Cab is 116.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset