2010 Chevrolet Suburban 2500 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Chevrolet Suburban 2500, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 8x165.1 (8x6.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 116.6 mm |
| Offset (ET) | 26 |
| Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 8x165.1 is commonly referred to as 8x6.5" in US Standard.
2010 Suburban 2500 — Year-Specific Fitment Context
The 2010 Chevrolet Suburban 2500 is in year 14 of 15 using the 8x165.1 pattern (1997–2011). Wheels from any 1997–2011 Chevrolet Suburban 2500 are cross-compatible with the 2010 model. Across its full production run (1992–2013), the Suburban 2500 has also used: 6x139.7, 8x180.
Chevrolet Suburban 2500 Bolt Pattern by Year
The table below shows how the Suburban 2500's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 6x139.7 | 78.1 | 21 |
| 1993 | 6x139.7 | 78.1 | 21 |
| 1994 | 6x139.7 | 78.1 | 21 |
| 1995 | 6x139.7 | 78.1 | 21 |
| 1996 | 6x139.7 | 78.1 | 21 |
| 1997 | 8x165.1 | 116.6 | 26 |
| 1998 | 8x165.1 | 116.6 | 26 |
| 1999 | 8x165.1 | 116.6 | 26 |
| 2000 | 8x165.1 | 116.6 | 26 |
| 2001 | 8x165.1 | 116.6 | 26 |
| 2002 | 8x165.1 | 116.6 | 26 |
| 2003 | 8x165.1 | 116.6 | 26 |
| 2004 | 8x165.1 | 116.6 | 26 |
| 2005 | 8x165.1 | 116.6 | 26 |
| 2006 | 8x165.1 | 116.6 | 26 |
| 2007 | 8x165.1 | 116.6 | 26 |
| 2008 | 8x165.1 | 116.6 | 26 |
| 2009 | 8x165.1 | 116.6 | 26 |
| ▸ 2010 | 8x165.1 | 116.6 | 26 |
| 2011 | 8x165.1 | 116.6 | 26 |
| 2012 | 8x180 | 124.1 | 42 |
| 2013 | 8x180 | 124.1 | 42 |
8x165.1 Pattern Context
This bolt pattern appears on 846 vehicles in our current database and is considered common.
Examples of other vehicles using 8x165.1:
Expert Buying Guide for 2010 Chevrolet Suburban 2500
For your 2010 Chevrolet Suburban 2500, the 8x165.1 bolt pattern and 116.6mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 26mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type—use conical (60-degree) or ball seat lugs as specified. Never mix seat types. Re-torque after 50-100 miles. Wheels from 1997-2011 Suburban 2500 models are direct fit.
Historical Fitment Data Reference
In our dataset, Chevrolet Suburban 2500 appears from 1992 to 2013 (22 model years). Across model years, this model appears with 3 bolt patterns (6x139.7, 8x165.1, 8x180).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 21.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 20mm or above 32mm to prevent brake caliper or suspension contact.
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 116.6mm; plastic rings are acceptable for street use.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Chevrolet Suburban 2500 — Frequently Asked Questions
What is the bolt pattern for a 2010 Chevrolet Suburban 2500?
The 2010 Chevrolet Suburban 2500 uses a 8x165.1 bolt pattern (also called lug pattern or PCD). The center bore is 116.6mm and the offset is 26mm.
What other years of Chevrolet Suburban 2500 have the same bolt pattern as the 2010?
The Chevrolet Suburban 2500 uses the 8x165.1 pattern from 1997 through 2011. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the PCD for a 2010 Chevrolet Suburban 2500?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Suburban 2500, the PCD is 8x165.1.
How do I measure the bolt pattern on my 2010 Chevrolet?
The 2010 Suburban 2500 uses a 8x165.1 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 26mm offset mean for the 2010 Suburban 2500?
An offset of 26mm means the wheel's mounting surface is 26mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
Why is matching the 116.6mm center bore important for the 2010 Suburban 2500?
The 116.6mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset