2010 Chrysler 300 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Chrysler 300, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 24 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 300 — Year-Specific Fitment Context
The 2010 Chrysler 300 is in year 6 of 19 using the 5x115 pattern (2005–2023). Wheels from any 2005–2023 Chrysler 300 are cross-compatible with the 2010 model. Across its full production run (1999–2023), the 300 has also used: 5x114.3.
Chrysler 300 Bolt Pattern by Year
The table below shows how the 300's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 5x114.3 | 71.6 | 40 |
| 2005 | 5x115 | 71.6 | 24 |
| 2006 | 5x115 | 71.6 | 24 |
| 2007 | 5x115 | 71.6 | 24 |
| 2008 | 5x115 | 71.6 | 24 |
| 2009 | 5x115 | 71.6 | 24 |
| ▸ 2010 | 5x115 | 71.6 | 24 |
| 2011 | 5x115 | 71.6 | 24 |
| 2012 | 5x115 | 71.6 | 24 |
| 2013 | 5x115 | 71.6 | 24 |
| 2014 | 5x115 | 71.6 | 24 |
| 2015 | 5x115 | 71.6 | 24 |
| 2016 | 5x115 | 71.6 | 24 |
| 2017 | 5x115 | 71.6 | 24 |
| 2018 | 5x115 | 71.5 | 24 |
| 2019 | 5x115 | 71.5 | 24 |
| 2020 | 5x115 | 71.5 | 24 |
| 2021 | 5x115 | 71.5 | 24 |
| 2022 | 5x115 | 71.5 | 24 |
| 2023 | 5x115 | 71.5 | 24 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2010 Chrysler 300
The 2010 Chrysler 300 uses a 5x115 bolt pattern with a 71.6mm center bore. When selecting aftermarket wheels, ensure they have a larger center bore and use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; the factory offset is 24mm, and deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type (conical/60-degree) to avoid wheel loosening. Wheels from 2005–2023 Chrysler 300 models are direct fit, but avoid 5x114.3 patterns without adapters.
Historical Fitment Data Reference
In our dataset, Chrysler 300 appears from 1999 to 2023 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x115).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 16.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles to prevent loosening from wheel settling.
- ✅ Use hub-centric rings if aftermarket wheels have a bore larger than 71.6mm to avoid vibrations.
- ✅ Check inner clearance for brake calipers and suspension when using lower offsets (e.g., 20mm or less).
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Chrysler 300 — Frequently Asked Questions
What is the bolt pattern for a 2010 Chrysler 300?
The 2010 Chrysler 300 uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 24mm.
What other years of Chrysler 300 have the same bolt pattern as the 2010?
The Chrysler 300 uses the 5x115 pattern from 2005 through 2023. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What lug nut size does the 2010 Chrysler 300 use?
The 2010 Chrysler 300 uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2010 Chrysler 300?
Absolutely. Just ensure the aftermarket wheels have a 5x115 bolt pattern, an offset near 24mm, and a center bore of at least 71.6mm (using hub rings if larger).
Do 2010 Chrysler 300s use lug bolts or lug nuts?
The 2010 300 requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2010 Chrysler 300?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset